No bro, water temp sensor is mostly use out of copper or aluminum where they get heated and sends the temperature to an electronic unit, oil press sensor is a sensor having a ball joint and a unit inside to monitor the amount of pressure. when more pressure produce the ball joint will move to a certain level depending on the pressure, and this readings will send to a electronic reading such as gauges
Yes, but it is not recommended to run straight water in the cooling system.
the temp sensor is on the top, front of the engine by the water neck
Which temp? Oil, Water or Outside air?
The temp sensor is located on the intake manifold
change the water temp sensor
Remove the tail gate then replace water temperature sensor.
on the roof
There are 3 temp sensors. 1 is under the spark plugs for the head cylinder temp. Another is on the thermostat housing for water temperature. And the 3rd is just beside the water temperature sensor and it's not a sensor it is a temperature switch.
There are several sensors on a 1995 Neon. The water temp sensor, crank shaft position sensor, and oil temp sensor are all mounted at various places on the engine block.
No, and a 2002 Stratus does not have a fuel temp sensor.
The temp sensor on the sc300 is at the front of the engine. It is mounted near the water pump and timing chain housing.
it is in the water manifold