Plywood is man-made from strips of thin timber that is glued together and put under a press.
ply wood and paint.
carbon fiber and ply wood
because ply Wood is hard and cheap
Presumably you're referring to such things as 'particle board' 'chip board' or 'ply wood' - all of those are made by either mixing waste wood with glue and pressing it to form sheets or - in the case of plywood - glueing whole thin sheets at right-angles to each other. As for where they come from - ultimately trees !
Yes ply wood is a good material to use
Skateboards are made out of ply's of wood stacked on top of each other most skateboards are either 6 7 or 8 ply boards and to hold those ply's together they use glue.
Pressboard is made from chips of wood. Plywood is made from thin sheets (plies, each one is a ply) of wood glued together with the grain going at right angles.
The wood that flexible is called Flex ply wood - i think.
Ply wood is man-made and contains lots of glue to stick the wood together. It is dangerous for hamsters for this reason. Hamsters are also allergic to cedar wood so avoid that too. MDF also has glue in and shouldn't be used. If you a trying to make a hamster cage out of wood I don't recommend it because the hamster can chew through it and you cannot clean it well. Wood can grow fungus easy, as I found out when I put a wooden house in for my hamsters. Hope this was helpful!
2 ply, ply wood and mixed with a bit of oak for strenght
color has nothing to do with it marine ply has more layers of wood than regular ply wood
300 to 400