0
No, they are not synonymous. An inspection is part of quality control and serve the purpose of finding a defect in a product or service or in the process of making it or providing it (some could used it to verify it is a good product or process and make it a positive evaluation). Quality control is much bigger; it includes the inspections and reporting. It might include some type of enforcing/follow up of corrections (some could could also use it to encourage continuance of the good parts of the process).
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
What is quality control?
Quality Control is generally recognized as the form of "control" that is based on inspection with the "quality police" making the quality. This is the forerunner of quality assurance where one should build a system that aims to remove the need for inspection by removing the possibilities for error. Prevention rather that detection
Is inspection a tool for quality control?
yes, it is. but it takes real guts to use
Difference between quality inspection and quality control?
Usually there is no difference. But both terms have slightly different meaning in different circles. Inspection means checking the characteristics of a product to ensure that conformity to a set of specifications is met. Sometimes it means checking 100% of a batch of product; sometimes it means checking only some samples (in that latter case, it is exactly the same as "statistical quality control". Quality control usually means only checking the conformity of products already made. It comprises inspection and other tests such as labtests. Some people use quality control to designate some more upstream activities that aim at preventing quality issues (usually these activities are called "quality assurance"). For an idea of a standard inspection procedure, see http://www.sofeast.com/PSI_procedure_17feb09.pdf.
What is the role of the quality control inspector?
I. QUALITY CONTROL ADMINISTRATION # SCOPE ## THIS MANUAL DESCRIBES THE OBJECTIVES AND DUTIES, OF THE QUALITY CONTROL DEPARTMENT, AND IS REQUIRED TO PROVIDE AND MAINTAIN A SYSTEM FOR QUALITY AND INSPECTION ACCEPTABLE TO OUR CUSTOMERS. THE SYSTEM APPLIES TO ALL SUPPLIES AND SERVICES INCLUDING THOSE PROCEDURDED FROM SUBCONTRACTORS OR VENDERS, AS APPLICABLE. ## THIS SYSTEM HAS BEEN COMPLIED TO CONFORM WITH INSPECTION SYSTEM REQUIREMENTS OUTLINED IN MILITARY SPECIFICATION MIL-I-45208. ## THE REQUIRMENTS OF THE INSPECTION SYSTEM AND SPECIFICATIONS MIL-I-45208A ARE NOT INTENDED TO CONFLICT WITH OR CANCEL ANY OTHER REQUIREMENTS OF A CONTRACT. IF THERE IS AN APPARENT CONFLICT BETWEEN THE PURCHASE ORDER OR CONTRACT AND THIS INSPECTION SYSTEM, THE PROVISIONS OF THE CONTRACTUAL DOCUMENTS SHALL PREVAIL. # REVISION ## PERIOD OF REVISIONS ## AT TWELVE (12) MONTH INTERVALS, THE QUALITY CONTROL MANAGER SHALL REVIEW THE STATUS AND ADEQUACY OF THE ENTIRE INSPECTION SYSTEM. ## QUALITY RECORDS AND FILES SHALL BE RETAINED FOR A MINIMUM OF THREE YEARS OR LONGER IF REQUIRED BY CUSTOMER PURCHASE ORDER OR SPECIFICATION. # INDICATION OF INSPECTION STATUS ## A SYSTEM OF QUALITY CONTROL STAMPS WILL BE USED FOR INDICATING INSPECTION STATUS OF CASTINGS AS THEY ARE PROCESSED THROUGH THE PRODUCTION PROCESS. # RECEIVING INSPECTION ## INSPECT INCOMING RAW MATERIAL TO INSURE THAT ALL QUALITY REQUIREMENTS ARE AS SPECIFIED IN THE PURCHASE ORDER OR SUB- CONTRACT. ## ENSURE CONFORMANCE TO SHIPPERS OR PACKING SHEETS OF ALL PARTS RETURNED FROM CUSTOMER OR SPECIAL PROCESSING BY SUBCONTRACTOR. ## SUPERVISE TRANSFER OF DISCREPANT MATERIAL TO QUALITY CONTROL SET ASIDE FOR THIS PURPOSE. ## TO INSPECT FOR COMPLETENESS AND OR DAMAGE AS WELL AS PROPER IDENTIFICATION AND PROPER WORK OF ALL TOOLING, FIXTURES, GAGES, MATERIAL SUPPLIED BY THE CUSTOMER. ## TO NOTIFY THE CHIEF INSPECTOR AND OR QUALITY MANAGER OF ALL SUCH TOOLING, FIXTURES, GAGES AND MATERIAL FOR PROPER RECORDING IN QUALITY CONTROL AND ENGINEERING FILES. # IN-PROCESS INSPECTION ## INSPECT CASTINGS PRIOR TO REMOVAL OF GATES AND RISERS. ## INSPECT CASTINGS FOR PROPER CLEAN UP AND FINISH AS REQUIRED. ## INSPECT CASTINGS VISUALLY FOR DEFECTS, HANDLING, CLEAN UP AND GENERAL APPEARANCE. ## INFORM RESPONSIBLE PERSONNEL AFFECTED BY DISCREPANCY AT EARLIEST INDICATION SUCH AS DISCREPANCY. # FINAL INSPECTION ## 100% VISUAL AND OR DIMENSIONAL INSPECTION AS REQUIRED TO MEET CUSTOMER ENGINEERING AND SPECIFICATION REQUIREMENTS. ## IF REQUESTED BY CUSTOMER, FINAL ACCEPTANCE STAMP WILL APPEAR ON CASTINGS SHIPPED. ## INSPECT FOR COMPLIANCE WITH BLUE PRINT AND OR INSPECTION REQUIREMENTS. CORRECTNESS OF IDENTIFICATION IN PROPER LOCATION, INSPECTION STAMP, CONTROL AND HEAT NUMBERS.
What are the points about the concept of quality control and inspection of a rubber products manufacturing unit?
The application of the concept of Quality Control and Inspection for a rubber products manufacturing unit would consist of: 1.Receiving Inspection -- to assure the product/material received meets the required specifications before it is manufactured. 2. In-process Inspection (On-going basis)- to assure the parts 3. Finished Goods Inspection (to ensure any secondary operations are performed to specifications and that product meets all requirements) This is the inspection side. Keeping all of this in mind, the concept of quality is to ensure the product is manufactured correct the first time. If you have a more specific question you'd like answered and can provide more details on specific aspects of quality, I'd be happy to help. Feel free to add to your original question or contact us in the link below
What is inspection and what is quality?
difference between inspection and quality control?
In this sentence is quality control inspection an adjective?
For the phrase 'quality control inspection' the word quality is an adjective; the word control is a noun acting as an adjective; the word inspection is a noun.
What is quality control?
Quality Control is generally recognized as the form of "control" that is based on inspection with the "quality police" making the quality. This is the forerunner of quality assurance where one should build a system that aims to remove the need for inspection by removing the possibilities for error. Prevention rather that detection
What is difference between inspection and quality control?
One difference is that "inspection" implies carefully looking at some thing or situation with a particular purpose. On the other hand, "supervision" implies overseeing a process to ensure completion or effectiveness.
Is inspection a tool for quality control?
yes, it is. but it takes real guts to use
What are the points you will keep in mind about the concept of quality control and inspection if you are the quality system manager of a rubber products manufacturing units?
Quality control and inspection are two distinctive functions of QSM (Quality System Manager). In the case of Rubber product, it may be a rubber band to the tire of an aeroplane , the quality is considered as most important.
What is Inspection planning?
a quality control document that records and controls all inspection and testing requirements relevant to the sub-contract or process.
What is inspection test plan?
a quality control document that records and controls all inspection and testing requirements relevant to the sub-contract or process.
What are the 10 most important components of Quality Control Organization?
Quality policy and objectives. Quality manual and procedures. Quality planning and control. Quality assurance. Process control. Product inspection and testing. Corrective and preventive actions. Employee training and competence. Management review. Continuous improvement.
Differences between walkthrough and inspection?
Walk through is an informal meeting for evaluation. No preparation is required Inspection is a methog that deserves careful consideration by an organizatin concerned with the quality of the product. It is conducted by quality control members.
What has the author American Concrete Institute written?
American Concrete Institute. has written: 'Guide for concrete inspection' -- subject(s): Concrete, Quality control, Inspection
Describe two quality control measures a business should adhere to?
two quality control measures a business should adhere are: 1.sanitation inspection 2. bereau of standards
