No, sand paper is rough.
sand paper
sand paper
to make wood smooth;atree
You could try with a bit of sand paper and try and scrub a wall smooth.
Assuming you meant "How do you get a high quality smooth finish on a piece of wood" - Use progressively finer sand-paper to smooth the surface.
sand paper is paper but instead of trees they use sand from the beach. sand paper is made out of sand and paper. BYE~*~*~
To repair ripped drywall paper effectively, start by cutting away any loose or damaged paper around the rip. Apply a thin layer of joint compound over the area, smooth it out, and let it dry. Sand the area smooth, apply a second coat if needed, and sand again. Prime and paint the repaired area to finish.
Clean it with rubbing alcohol, sand it using sanding paper, then buffer it and then rub it off with a cotton cloth.
Abrasive paper is also called emery paper or "sand" paper. It a sheet of strong paper onto which some glue is pasted on one side and into this wet clue particles of sand (or other rough material) are stuck. Once the glue dries, the rough side of the paper can be used to rub (and smooth) an object (or file your nails).
no
Abrasion erosion is similar to using sandpaper to smooth the edges of wood. In this type of erosion, particles like sand and pebbles are carried by wind or water and wear away rock surfaces over time.
To fix ripped drywall paper, you can apply a thin layer of joint compound over the torn area, smooth it out with a putty knife, and then sand it down once it dries. This will help to repair the damage and create a smooth surface for painting or finishing.