answersLogoWhite

0

That would be analog. A speaker is not just on or off, and its range varies as the voltage changes. Sound cards use a D/A converter to convert digital data to audible sound.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

What are AD and DA?

AD is Analog to Digital conversion the use is to do digital measurements of analog voltages and currents, a computer soundcard is an AD converter that convert analog sound to digital sound so that it can be played on a computer, and DA is the opposite, digital to analog conversion, the digital sound on the computer is converted to analog sound to drive a speaker or headphone


What is the term used when digital values are converted to create an analog sound?

When digital values are converted to create an analog sound, the term used is Digital-to-Analog converter.


Is Sound digital or analog?

Sound can be both digital and analog. In analog sound, waveforms are continuously varying, while in digital sound, the waveforms are represented by discrete binary numbers. Most modern audio technologies, such as CDs and MP3s, use digital sound, while older mediums like vinyl records use analog sound.


Does sound have to be converted from digital to analog for a computer?

No. Sound has to be converted from analog to digital for use by a computer, not the other way around. It is converted to analog so amplifiers and other analog equipment can use it and so you can hear it.


How do analog sound systems compare to digital systems?

There are many different noted differences of an analog sound system when compared to a digital sound system. The most referenced difference is that of quality of sound.


Why the sound comes out from computer speaker is analog?

Because our brains lack the capability to de-code digital signals. Therefore, any digital sound must be converted to analogue (and be within a specific frequency range) for us to hear it.


What kind of cable and connector connects outside speaker to TV with a digital audio jack?

Speakers are analog devices. There is no cable and connector that will connect a digital audio jack to a speaker without a digital to analog conversion and an amplifier. If the audio output is digital, you will need a compatible amplifier that has the same digital input. Then you will need to link the amplifier to the speaker with exterior grade cable.


Is speaker output analog or digital?

Bluetooth is a digital communication interface. It tends to be used for audio signals more than other applications so it is often perceived as carrying analog audio. Despite the appearance, it is definitely digital and not analog.


What are the advantages of a digital radio over an analog radio?

The advantages of digital radio over analog radio are digital radios get more channels than analog, they are clearer in sound and signal and have more additional features.


Why is microphone useful?

Original.It changes the sound (pressure waves in the air in the room) into a digital signal.Correction:It changes the sound pressure waves into an ANALOG signal. Any digital signal is the result of feeding the analog mic signal into an analog-to-digital converter, typically in a computer's sound card.Original.An electric guitar doesn't need a microphone because it makes a digital signal.Correction:A simple guitar with magnetic pickups creates an ANALOG signal from the motion of the strings, typically tens to low hundreds of millivolts. If you want a digital signal, you need: 1. Analog-to-digital processing in the guitar itself, or2. Analog-to-digital processing externally, such as a computer sound card.Original.An mp3 recording is a digital signal.


What is analog sound and example of analog sound?

analog audioRefers to recording audio in a format of continuous vibrations that are analogous to the original sound waves. Before audio recording became digital, sounds were "carved" into vinyl records or written to tape as magnetic waveforms. Contrast with digital audio


How may analog media be converted to a digital format?

digital imaging (using digital cameras and scanners), sound cards, and analog video-capturing devices sample, compress, and convert analog media into a series of 0s and 1s (digital) signals for processing by a computer