Only when heated, which degrades the strength of the alloy.
Milled steel is a cheap form of iron-carbon alloy that is subject to corrosion but is malleable and does not suffer from the brittleness issues of Stainless steel. Stainless steel contains additional compounds that reduces atmospheric and hydro-corrosion and increases the hardness of the steel. This makes it more expensive, less malleable and is more likely to suffer from stress fatigue and stress fractures
Ferritic stainless steel are magnetic, containing no nickel and not hardened by heat treatment. For example 409 and 430 stainless steel Martensitic stainless steel are also magnetic and containing no nickel but hardened by heat treatment. For example 410 and 420 stainless steel
There is stainless steel and there is magnaized stainless steel but you can not make regular stainless steel magnetic
steel is steel and there is nothing you can do about it even if it is stainless steel or it i not stainless steel it will rust
Yep, you can weld steel to stainless and you can weld stainless to steel. You can use steel or stainless welding rod in either case but the steel or steel welding rod will of course rust.
No; steel is an iron-carbon alloy. Stainless steel is an alloy of steel with chromium added. Stainless steel is usually 13-25% chromium (by weight).
Well, the answer lies in the question; by saying 'real' stainless steel, you are implying that there are fake metals which go under the name 'stainless steel', thus the difference is that the stainless steel in refigerators is actually stainless steel, and the fake stainless steel is not...thus your question is answered...
No, Stainless steel is not porous. Steel how ever is.
stainless steel
Steel and stainless steel tend to weigh around the same, however, stainless steel can sometimes be a bit lighter.
Stainless Steel has more advantages than disadvantages.Disadvantages of Stainless Steel:Stainless steel tends to scratch and dent.Food, grease and fingerprints show very clearly on stainless steel, making frequent wiping and cleaning a necessity.High initial costDifficult to fabricate, or in other words, it is not as malleable as other metals, say iron, and hence if not fabricated properly, results in costly re-work.Difficult to weldHigh cost of polishing etc. i.e. adding finishing touches for the market.Advantages of Stainless Steel:Very durableEasy to use and cleanHygienicLooks nice
Stainless Steel 316, a type of stainless steel