The AP-G250 has setup instructions as well as a computer interface making it easy to install.
COM port is used to configure a router but you can also get a COM port to USB port adapter which can configure a router using a USB port.
Configure the router ID on both routers. Configure the R2 router interfaces for area 0. Configure a loopback interface on both routers. Configure the proper subnet masks on the router interfaces.
127.0.0.1
only to configure it, after that, no.
You do not really have to configure a Linksys wireless internet router. It will do this automatically by picking up signals after you attach the Ethernet cable.
hostname router1
If your router supports such option you will find the option in the router settings.
router>enable router#configure terminal router(config)#line vty 0 4 router(config-line)#password cisco router(config-line)#login to configure router with telnet you must set up password or secret for privilieged mode.
What is the network ID of 199.255.255.9?
When you want to configure a switch and/or a router.
When you want to configure a switch and/or a router.
Usually they are, you have configure the router for G wireless networks.