Yes, the bridge is still used by over 4 million vehicles per year of up to 4 tons weight. This is because the engineers who completed the bridge in 1864, John Hawkshaw & W H Barlow, made it far stronger than originally designed by Isambard Kingdom Brunel, who had died in 1859. The bridge is his memorial, paid for by his fellow engineers.
The towers were made of pennant stone. The cables were long metal bars stuck together and the suspension cables were iron rods. The anchorages are concrete houses.
I think tht brunel made the clifton suspension bridge so big because he wanted something wide and broad where pedestrians as well as vehicles could go on. In the first place, it was meant to be used for horse drawn traffic and pedestrians so tht's prob y he made it very broad and wide. Hope this helps! :)
This question is difficult to answer as "suspension bridge" is a very loose term. Ancient people from South America and the Himalayas have used rope suspension bridges to span chasms since ancient times and there are arguments about who first designed/built the first modern bridges. For information relating to these arguments see the related link below.
The different between suspension bridge and beam bridge are beam bridge are for short distance but suspension bridge for long distance. Beam bridge are used for highway passes and suspension bridge for wide waterway passes.
Actually, a suspension bridge mostly has 2 or more towers. The towers on a bridge are used for support without them a bridge would collapse! :-)
For a long spans mainly.
Some say it is the suspension bridge, others say it is the arch bridge.
A suspension bridge is supported from a height of 30 feet. The length of the wire used to suspend the bridge, from the ground to the top, is 65 feet. What is the angle of elevation from the base of the bridge to the point of suspension?
The type of bridges are: -truss bridge -arch bridge (truss arch bridge) -suspension bridge (suspension truss bridge) -cantilever bridge
Bridge towers are used in suspension bridges or cable stayed bridges. cables, what hold roadway, are fixed there.
Arch bridges are in the shape of an upside down "U" with mainly steel beans, while supension bridges have one or two Major verticle beams with strong wire connecting to the bridge.
Suspension can be used in many different contexts. One example would be: "He feared that the rickety old bridge would collapse under the weight of the trucks, but the bridge's suspension held until all were across". Another would be: "Being caught drinking at an after-hours bar caused his immediate suspension from the team". And there are a lot of other, very different examples.