Want this question answered?
R = V/I Therfore the resistance is proportional to the voltage and inversely proportional to the current.
This is because the resistance is measured by applying a fixed voltage to the resistor and measuring the current. Since I = V/R, the current/resistance relation is non-linear.
Resistance can be changed by strain over time and changes in the temperature. Resistance thermometers are sensors that are used to measure temperature by correlating the resistance of the RTD elements.
It is a linear device if it is not a wire wound resistor. These become non linear to AC at high frequencies because of their inherent inductance.
yesAnswerNo it cannot, any more than Ohm's Law can be applied to circuits with non-linear elements.
YES it is linear. It is a passive device classified as linear however as frequency increases its behavior will change.
A linear potentiometer is a potentiometer that changes linearly with rotation of the knob. A 30% degree turn will change the resistance 30%. It's a direct relationship. This is in contrast to log potentiometers, which change resistance logarithmically with turns in the knob.
Two examples of non linear resistance is a diode and a light bulb.
R = V/I Therfore the resistance is proportional to the voltage and inversely proportional to the current.
The resistance value for linear resistance is changed by changing the wavelength of the current or by installing additional resistors in the circuit. This restricts the amount of electricity which flows through the wiring.The resistance value for the linear resistance can be changed through strain over time. It can also be changed by changes in temperatures, such as going from hot to cold.
V = I*R R = V/I If we fix the voltage at 1 then R = I^-1 The change in the resistance scale is the derivative R dr = I^-1 di R dr = -I^-2 R dr = -1/(I^2) Explanation: The change in the resistance measurement decreases by the inverse of the current squared.
Yes, provided the resistance is constant. If the resistance varies with current, then you have a non-linear circuit
You can say that the variables are inversely proportional.
DC is just direct current into a resistance it is a linear function. AC if the resistance is non reactive it would be the same linear function.
Ohm's LawAnswerIt's not known as anything; it's simply an equation. Ohm's Law describes constant proportionality between current and voltage for certain, but not all, materials (linear or ohmic) -it has nothing to do with this equation.
Yes, the rate of change can be linear or non-linear.
This is because the resistance is measured by applying a fixed voltage to the resistor and measuring the current. Since I = V/R, the current/resistance relation is non-linear.