0
What else can I help you with?
What is the Ideal value of Stability factor?
1
Why Voltage x Current do not equal rated power?
In an AC system power is equal to Voltage x Current x Power factor. Power factor is not constant and depends on the type of the load. Ideal value of the Power factor is 1, where as practically remains less then 1.
Ideal value of vswr?
1 (one)
What is compressibility factor?
The compressibility factor, denoted as Z, is a measure of how much a real gas deviates from ideal gas behavior under given conditions of pressure, volume, and temperature. It is calculated as the ratio of the molar volume of the gas to the molar volume that would be predicted for an ideal gas at the same conditions. A compressibility factor of Z=1 indicates ideal gas behavior, while Z<1 or Z>1 indicates gas behaves as more or less ideal, respectively.
Why does a conversion factor always have a value of 1 when the fraction does not equal 1?
The question cannot be answered because it is based on an incorrect understanding of a conversion factor. For example, the conversion factor for inches to millimetres is 25.4 mm = 1 inch. It never, ever has the value 1.
What is the form factor of sine wave?
Form factor is (RMS value)/(average absolute value) For sine wave form factor = (1/sqrt(2))/(2/pi) = about 1.11
What is the ideal value of vswr?
The ideal value of VSWR is 1 (one), which means that full power which has been arrived to the antenna is emitted to the air. In reality it is always more than 1, which means that some part of power reflected from antenna to the transmission line.
How do you calculate power factor kvr?
Power Factor = KVA/KW. This has no unit. Its value is always 1 or less.
How can I convert a pressure value from pascal to psi?
To convert a pressure value from pascal to psi, you can use the conversion factor of 1 pascal is equal to 0.00014503773773 psi. Simply multiply the pressure value in pascal by this conversion factor to get the equivalent value in psi.
What is the formula for Present Value Interest Factor?
Present Value Interest Factor, abbreviated as PVIF and is used to simplify present value computations, may be computed as follows: PVIF = 1 / ( ( 1 + r) ^ t) where... r = interest discount rate t = number of periods
What is form factor of square wave?
The form factor of a square wave is defined as the ratio of the root mean square (RMS) value to the average (mean) value of the waveform. For a square wave, the RMS value is equal to the peak value, while the average value is equal to the peak value divided by 2. Therefore, the form factor for a square wave is 1. This indicates that the waveform maintains a consistent amplitude, leading to a straightforward calculation of its form factor.
What is the value of van t hoff factor of CH3OH?
The van't Hoff factor for CH3OH (methanol) is 1, since it does not dissociate into ions in solution.
