0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How many feet below sea level equals 10 Bar?
1 Bar represents one atmosphere of air pressure. 10 Bar is approximately equal to 100 Meters of water depth. 1 meter = 3.28083989501 feet. It follows that 100 meters = 328.083989501 feet. Therefore, 10 Bar is approximately equal to the expected pressure at 328.083989501 feet of water depth (not sea level).
How many degrees does the temperature decrease as you increase elevation?
generally speaking, for every 100 m (330 ft) elevation increase, the temperature drops 0.6 degree Celsius (or 1.08 degree Fahrenheit).
How deep does a home geothermal pipe have to be?
100 feet
What is the boiling point of water of the sea level?
100 degrees celcius
What is the altitude at which air pressure is about 1000 millibars what is it at 200 millibars?
The standard atmosphere (symbol: atm) is a unit of pressure and is defined as being precisely equal to 101.325 kPa Air Density decreases at a rate of 2.9% - 3.0% for each 1000 ft. of elevation above Sea Level. See Standard Atmosphere below for background information. 1 000 feet = 304.8 meters So in rough terms You will lose about 1% of the pressure for each 100 meters due to elevation increase 0m = 101.325 100m =101.32500 - (101.32500 * .01) = 100.31175 200m = 101.32500 - (101.32500 * .02) = 99.2985
What is the elevation/sea level of flordia?
100 feet above sea level
Which state has lower average elevation-Arkansas or Florida?
Definitely Florida. Florida's average elevation is 100 feet (30 meters) above sea level while Arkansas's average elevation is 650 feet (200 meters) above sea level
What is the elevation of Louisana?
The highest point in the state is 535 feet above sea level. It is Driskill Mountain in the northern part of the state. The lowest point is in New Orleans, and it is 8 feet below sea level. The average elevation of the state is 100 feet above sea level.
Can a contour line on a topographic map connect a point with an elevation of 100 feet to a point with an elevation of 110 feet?
No. Contour lines connect points of the same elevation
What is the elevation of Cathedral City CA?
Cathedral City, California is 328 feet (100 meters) above sea level
What is the elevation of the Arizona Diamondbacks baseball diamond?
Chase Field sits at close to 1, 100 feet above sea level.
Why can a contour line on a topographic map connect a point an elevation of 100 feet to a point with an elevation of 110 feet?
because
What is the difference between 100 below sea level and 100 above sea level?
200 units of elevation.
How much land is 100 x 100 feet?
Multiplying the length by the width gives 100 x 100 = 10000 square feet of land.
What is the answer to this question of if the relegation changed from -100 feet to 600 feet what is the total elevation change?
The way you typed the question, it has no answer. I'm thinking that you were watching TV or talking on the phone when you wrote the question, and instead of writing 'elevation' the first time, you wrote 'relegation' instead. The total elevation change is (the elevation when you finish) minus (the elevation when you start). In this situation, that's (600) - (-100) = 700 feet .
Can a contour line on a topographic map connect to a point with an elevation of 100 feet to a point of 110 feet?
No. Contour lines connect points of the same elevation
What is the average elevation of Delaware?
* Highest Point: 447.85 ft. above sea level, near Ebright Road in New Castle County (city dump) * Lowest Point: sea level along the Delaware beaches * Wilimngton: 100 ft * Dover: 9 ft * Air Force Base: 24 ft
