No, you add oil at the oil fill cap on top of the engine.
Yes, you can change only the filter and then add enough oil to replace the amount lost by removing the filter.
No you only change the filter when you change the oil.
you purchase the oil and a filter, then locate the oil pan and remove the drainplug bolt, after the oil has drained you change the oil filter, replace the drainplug and add oil
Plug under deck, square driver, remove this, drain oil remove oil filter install plug and new filter and add oil...
22 ounces. If it has an oil filter add 4 ounces when changing the filter and the oil.
Yes, as long as the filter fits and you add the extra oil for the extra capacity of the larger filter.
When I was doing my own oil changes I would prefill the oil filter and then put that much less into the engine , but any place that changes oil does not have the time to do that
It comes standard with one engine oil filter and one transmission oil filter. However, after-market oil filters are available, and some people add an extra filter in hopes of extending the life of the oil or engine.
You can prefill the oil filter if you want , just remember to put that much less oil into the engine
It takes 5 qt add 1 liter if you change the oil filter It takes 5 qt add 1 liter if you change the oil filter
Usually around 2 qts . with filter . change filter add a qt and a half start engine to fill filter and then check oil to see if you need to add more.
After oil/oil filter change, add four quarts and then check level as you add the fifth, 4 to 6 oz at a time.