Want this question answered?
A tape measure is used in tailoring. A meter with a wheel is used to measure cloth coming off a loom.
Take a tape measure or a measuring wheel and run it around the border of the pool.
Lengths - in units that are marked on the tape measure.
A pulley is just a wheel with a groove to hold a belt ,rope or chain. Your car likely has pulleys to run the radiator fan , the water pump , the air conditioner and the power steering. Elevators have a pulley. Your furnace probably has a pulley driven fan or pump. Movie projectors and video tape players have pulleys. Bicycles has a pulley to allow the pedal crank shaft to turn the drive wheel.
Measure the perimeter of the wheel using a tape measure. Then use the formula to find out the diameter D = perimeter/3.14 ========================================== You could certainly do it that way. But it would be much more direct to just measure all the way across the wheel, between the two points on the edge of the wheel that are furthest apart. That would be the diameter.
Yes
a pulley wheel ans axile gears cork springs and sometimes a lever
what is the different kind of simple machine ?wedge, screw, inclined plane, pulley,wheel.
An easy way to measure is to put a tape measure in the middle of the front wheel and run it back to the middle of the rear wheel. That would be your wheelbase.
a ruler or measuring tape yard stick carpenter's square caliper micrometer telescoping gauge surveyor's chain digital laser "tape measure" digital ultrasonic "tape measure" light rangefinder laser rangefinder telescopic measuring wheel map-measure wheel odometer sonar radar
Simple, grab a tape measure. Take the end and place it on one edge of the wheel and try to make a straight line across to the other egde of the wheel. Read the numbers on the tape and there you go, you've got your measurement.
A tape measure is used in tailoring. A meter with a wheel is used to measure cloth coming off a loom.
Take a tape measure or a measuring wheel and run it around the border of the pool.
take a tape measure and measure from the center of the wheel hub, or dead center of all your wheel studs to the top of the brake caliper. then measure the inside of the wheel to the center. if the wheel is bigger it will fit. if the wheel is smaller it wont work.
A pulley is just a wheel with a groove to hold a belt ,rope or chain. Your car likely has pulleys to run the radiator fan , the water pump , the air conditioner and the power steering. Elevators have a pulley. Your furnace probably has a pulley driven fan or pump. Movie projectors and video tape players have pulleys. Bicycles has a pulley to allow the pedal crank shaft to turn the drive wheel.
Lengths - in units that are marked on the tape measure.
Measure the perimeter of the wheel using a tape measure. Then use the formula to find out the diameter D = perimeter/3.14 ========================================== You could certainly do it that way. But it would be much more direct to just measure all the way across the wheel, between the two points on the edge of the wheel that are furthest apart. That would be the diameter.