Yes All Aurora are a Like 1995-1996-1997-1998-1999
Yes, the Oldsmobile Ninety-Eight is equipped with a turn signal relay. This component is responsible for controlling the flashing of the turn signal lights when activated. If you're experiencing issues with the turn signals, it may be worth checking or replacing the relay, along with other related components like the fuses and bulbs. Always refer to the vehicle's service manual for specific details on location and replacement procedures.
if your turning signal is not working it maybe the turn signal. it was like that in my 93
There is no such thing as a relay flasher. It is either a relay or a flasher. Are you referring to the turn signal flasher or an actual relay like the fuel pump relay? Please advise.
The turn signal relay is located on the driver side by the fuse box it is just plugged in like a fuse you just unplugged and insert the new one.
A turn signal flasher for that vehicle resembles a relay.
There is no relay...your turn signal /combo switch is bad...
pull the fuel pump relay and put it in another location that uses the same relay...like the A/C relay.
Sounds like a bad switch or relay.
90% of the time, a silver round flask located under the driver side dashboard panel, on some it looks like a regular black square relay, its actually called a flasher.
I have a mustang 1991 GT I bought like a week ago,,everything work . but the turns signal no,,,i replace already the swich[turn signal] but nothing,,i replace the hazard swich,nothing,,everything have power,,all the fuse too,really I want to know if they use some relay,,,i check already in the fuse box the hazard relay please somebody know what is the problem,,,,thanks
probably have a bad relay, that was my problem.. Are your turn signals not working, but your hazards lights are? and if so, do you hear a constant clicking sound, like your turn signal is turned on? Does the clicking sound go away when you hit the brakes? It is the relay.
Sounds like you have a bad relay. Most likely your turn signal relay. There is a lid on the bottom inside of the glove box, 2 screws hold it in place, remove the screws and the relay should be there.