i gota three 3hp seahorse johnson boat motor i need to get to head how does everthing come apart
David Underhay The decal on my 1968 3hp Johnson says use either of: Champion J4J, AC M42K, Autolite A21X sparkplugs. You may have to find the current equivalents
My twin cylinder 1965 Johnson 3hp uses a 50:1 gas:oil ratio.
How do you change the oil in a 1967 3Hp Evin-rude outboard motor?
Johnson outboards model number JW-10, were produced from 1952-1954, as 3hp.
The recommended plug gap for the 1993 model, 3hp Evinrude outboard is .030 in.
1955 3hp
Model number JHF 23 A would be a 1968, 3hp Johnson outboard.
A 3HP motor can reach speeds up to at least 30 mph depending on what you are using it for.
My daughters mini bike with a 3hp Briggs has 80psi compression and runs great. A motor I got "running" off eBay has 55psi compression, runs but has NO power. -Jason
not sure. i want to know too. What is this on? need more info.
it depends on the load and size of the motor if the motor has to drive heavy loads from initial state it require more torque, for this we use star-delta starters where load on motor in permissible then we use a DOL starters DOL starters are direct supply feeders to the motor so there is no rule to use a starter. we can use anything to swith the motor. for protection we need a overload relay and you ask for a 1ph motor, i.e maximum 3hp motors are available for less than 2 hp motor you can use a 6amp switch used in household or a 6amp mcb (includes overload). for 3hp a 16 amp switch or a 10amp mcb is more than enough
3hp