yes there is just go on eBay it is cheaper.
Purchase a fog light kit from your local auto parts store. The kit will include directions.
i have an is300 also and a got a xenon hid kit on my fog lights, they can be replaced , the bulb type is 9006 (hb4)
get an LS or SS bumper with the fog light holes, and there are fog light harnesses on eBay u could get that actually come with the actual fog light assembly and the fog light harness. if not buy them both separate. Then u could make a hole where the original switch should go with a dremel tool and there u have it
It's a very easy do it yourself install, However be sure to get the 2013 fog lights. It has changed from the 2012. Learned the hard way here.
fog light holeyou have to take off bumber and cut holes with dremal tool using a drywall hole cutting bit. Full instructions are at http://www.handa-accessories.com/element/05fogs.pdf includes wiring info. Helpful even if you are not installing their kit.
The cost of a lambo door kit for your 96 Mazda b2300 would be somewhere between 199.00 to 359.00.
The fog light fuse is located in the fuse panel to the left of the light switch in the dashboard accessible when the drivers door is open. carefully pry the cover off and the fuses are labeled. A too for removing the fuses is located in the tool kit issued with the vehicle.
First step is to get a switch with fog lighs feature and replace it. You can find those on eBay for 30-40 bucks. http://cgi.ebay.com/ebaymotors/97-CHRYSLER-LHS-HEADLIGHT-FOG-SWITCH-HEAD-LIGHT-DIMMER_W0QQcmdZViewItemQQcategoryZ33596QQitemZ8026356018QQrdZ1QQsspagenameZWDVW Look if your wiring harness alrady has the conectors for the fog lighs. They should be located behind the front bumper in the fog lights areas. If it does, just hook it up and you are done. If it doesn't, you can install a fogs light universal wiring harness and use the OEM switch to activate the lights. You can also get this on eBay. http://cgi.ebay.com/ebaymotors/2-FOG-DRIVING-LIGHT-WIRE-HARNESS-WIRING-KIT-KC-CEPEK_W0QQitemZ8053530469QQcategoryZ33709QQrdZ1QQcmdZViewItem
My fog lights on my 03 tiburon do not come on any more, the green light on the button to turn them on is also not working. can anyone tell me were the fuse is located and what is the abbreviation on the panel for the fog lights. i recently had a HID conversion kit installed, could this have something to do with them not working, could the ballist be malfunctioning, and if so why both at the same time, Help!
If you got a gm foglight kit, than the wire goes into the fuse box under the hood, the pin goes up into the relay. Then the trucks body control module has to be reprogramed for fog lights. This can only be done at a Chevy dealer. It should not be expensive.
Kit Gleave died on May 23, 2008, in UK.
ABC Wednesday Night Starter Kit - 2008 TV was released on: USA: 15 August 2008