there is no bleeder valve on a Safari van unless someone put a diesel in it
The bleeder valve for fuel injection for 1986 Nissan 300ZX is located at the furthest end of the fuel rail.
you hook up a fuel pressure guage to it to check the fuel pressure
Assuming you mean the fuel line, the system has an electric pump. With the bleeder valve open on top of the fuel filter, cycle the ignition key on and off (no need to crank the starter) several times (pausing briefly in the on position) until fuel comes out of the bleeder valve. Close bleeder valve and start the engine.
let the air out of the bleeder valve on the fuel rail.
it is on top front of engine on left side,belt side. above water pump on engine. there is a bleeder cap on it. the back side bleeder is to relieve fuel pressure.
Bleeder valve: Valve, usually operated by a wrench, to release the air from a hydraulic system EG: Hydraulic brakes or Diesel engine injection systems or Early gasoline fuel injection systems or Cooling systems or many other applications that you need to remove air from fluid systems.
55 - 61 psi
Built into the fuel pump
I am having trouble finding the fuel pressure relief valve on my 1997 F150 pickup.
The 1997 Nissan Pathfinder does not have a schrader valve. If you want to test the fuel pressure system (fuel pump, lines, pressure regulator) you have to insert a 'T' in the fuel line under the hood and connect a fuel pressure gauge to the 'T'.
Nothing used with that name.
locate the bleeder valve in the manifold. 1 guy turn on ign, then 2nd person bleeds air from the valve.... on the fuel rail.