Yes, between the two firewalls.
The clutch master cylinder and the brake master cylinder are part of the same system . Both can be filled at the brake master cylinder using brake fluid
Master cylinder reservoir, located on the firewall, drivers side.
The power steering fluid reservoir on a 1998 Honda Passport is found on the driver side of the engine bay. It is located in front of the brake master cylinder reservoir.
On a 1998 Ford Contour : The BRAKE FLUID reservoir is also the CLUTCH FLUID reservoir It is located in the engine compartment , near the firewall ( that's the metal wall that divides the passenger compartment from the engine compartment ) It is located on the drivers side of the vehicle
It is important that you bench bleed the unit before you install it and keep the reservoir full during the process.
You put brake fluid in the brake fluid reservoir on a 1998 Dodge Stratus. This is located on the master cylinder, under the hood, on the driver's side.
How do you change a Master Cylinder and hydraulic clutch line for a 1998 Chevy S10?
The abs uses the brake fluid from the regular brake master cylinder.
The hydraulic clutch reservoir should be located near the master cylinder on the driver's side if it has one. It is very small about 2-3 inches in diameter.
In the master cylinder.
Low brake fluid level or a stuck brake fluid level sensor. Check the brake fluid level and if it is ok, tap on the master cylinder reservoir with your finger
You would add DOT-3 brake fluid to the master cylinder brake reservoir. If your not sure please stop by an auto parts store and ask for help. If you have to add brake fluid to the reservoir you need to have the brakes inspected for repair or replacement.