No adapter is needed, 110 and 115 volt are interchangeable.
its called a transformer
Yes, provided the outlet has a three element receptacle. The third prong is ground. If you use an adapter that connects three prongs to a two slot outlet there is a shock danger.
What you will need is a 240 to 120 step down transformer. An adapter might work but it depends on what the current draw of the neon sign is at 120 volts.
An adapter can be used. Make sure that the adapter that you use is of a capacity that it can produce the amperage that your appliance needs. An adapter too small will burn itself open and will be of no use to anyone. Remember; Watts = Amps x Volts.
No a 230 volt appliance should not be pluuged into a 110 volt socket (And vice versa) you need to buy a converter that can be plugged into the 110 volt outlet then the appliance can be plugged into the converter.
Yes, a 110 volt device can be plugged into a 125 volt receptacle. The voltage rating on the receptacle is only there as the highest voltage supply that the manufacturer recommends their equipment be connected to.
The bulb will be about half as bright.
No conversion needed. These are nominal voltages which range from 110 to 120 volts. It will operate fine on the outlet.
no
Yes.
Yes, provided the outlet has a three element receptacle. The third prong is ground. If you use an adapter that connects three prongs to a two slot outlet there is a shock danger.
Yes
zzzzzzzzzzzAAAAAAAAAAAAAAAPPPPPPPPPP !!!!!
No, the applied 110 volt is too high for a 3 volt appliance. The appliance would burn out right away.
Yes - a hair-dryer rated at 120 volts will work in a 110 volt outlet.
Nominally 110 to 120 volt power strip is okay to connect to a standard outlet.
No. You need to rewire the circuit from the electric panel.
Yes you can - with a transformer. Maplin Electronics sell a converter that allows you to plug appliances that run on 110V into the normal UK mains. See the related.