Honda Prelude
Dodge Ram
Toyota 4Runner
Chevy Trailblazer

Is there anyway you can test the TP Throttle Position sensor without a scan tool?

515253

Top Answer
User Avatar
Wiki User
Answered
2005-11-12 02:07:04
2005-11-12 02:07:04

yes. with a voltage meter,but you must know what wire is your signal wire and 5volt reference.should be almost nothing at idle and up to 5volts full throttle. gm jim THIS WORKED GREAT!!! HTTP://92lude.com/idle_air_control_bypass_mod.htm

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


The throttle position sensor is in the throttle body.

The function of a throttle position sensor is to monitor the position of the throttle in an internal combustion engine.

A throttle position sensor is a sensor used to monitor the position of the throttle in an engine. The sensor is usually located on the throttle-body spindle so that it can directly monitor the position of the throttle valve butterfly.

The throttle position sensor is located on the throttle body at the end of the throttle shaft.

The throttle position sensor is located on the throttle plate.

The throttle position sensor is on the throttle body, opposite of where the cables attach.

The throttle position sensor is on the throttle body on the opposite side of the cables.

The throttle position sensor is on the throttle body.

The throttle position sensor is on the throttle body.

Generally speaking the throttle position sensor is on the throttle body.

No map sensor is manifold absolute pressure sensor and tps throttle position sensor

The Throttle Position Sensor is conneceted to the end of the Throttle Shaft inside the Throttle Body. P.S. The Throttle Position Sensor is part of the Throttle Body and must be replaced as a unit. Hope this helps ya.

The throttle position sensor is located on the throttle plate, straight across from the throttle linkage.

The throttle position sensor is built into the electronic throttle assembly( throttle body) and is not available seperatly.

The throttle position sensor is on the throttle body at the end of the throttle shaft.

the tps or throttle position sensor is located directly to the throttle plate opposite of throttle cable's on the throttle body.

The throttle position sensor is the three wire sensor on the throttle body opposite of where the cables attach.

The Toyota Tacoma throttle position sensor is adjustable. There is an adjustment screw on the back of the throttle position sensor.

The throttle position sensor can be tested by moving the throttle as observing the engine's response. If it is smooth and consistent, the sensor is functioning properly.

No, the throttle position sensor detects how far open the intake is. The crank position sensor watches the rotation of the crankshaft.

the throttle position sensor is mounted on the throttle body of the engine

The throttle position sensor is mounted on the throttle body opposite of where the cables attach.

The throttle position sensor is mounted on the side of the throttle body

The throttle position sensor is on the throttle body opposite of where the cables attach.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.