0
What else can I help you with?
Can you use a Yamaha motorcycle part on a honda motorcycle?
No, most Yamaha bike parts can not be used with Honda. Honda has some specific parts that may only be replaced by Honda.
You broke the part that holds the thermostat leading to the engine what is this part called?
waterneck/thermostat housing
Changing thermostat on a 87 Honda Accord?
Drain the cooling systemFollow the upper radiator hose to the engine to locate the thermostatCompress the hose clamp with pliers then slide clamp away from thermostat housingRemove the bolts and detach the housing cover.Stuff rag into the engine opening and remove all traces of old gasket.So, I have a question about an 87 Honda Accord. During the winter (Colorado) I started my car and blew a bolt off the thermostat housing that connects it to the engine... I'm not sure what that part is, or how to fix it, but I would really like to fix it. Do you know what that part is called? Or is it just connected and I would need a whole new engine? Again it's the part between the engine and the thermostat housing.... The bolt busted out and broke the loop that it was put into to hold the thermostat to the engine... ANYONE?
Where is the thermostat on a daihatsu rocky?
The thermostat on a Daihatsu Rocky is located in the engine compartment. It is on the top part of the engine.
Where is the thermostat on a 2002 Honda Passport 3.2. Its not the engine in the haynes manual. Only place i can see it is under the intake in the lower radiator steel pipe. Any help?
On a 2002 Honda Passport with a 3.2L engine, the thermostat is located in the lower radiator hose, which connects to the engine block. You’ll need to remove the lower radiator hose to access the thermostat, which is housed in the thermostat housing mounted on the engine. If it appears to be under the intake, it might be because the intake manifold covers part of the engine, but the thermostat itself is indeed in that lower hose area. Make sure to drain the coolant before removing the hose to avoid spills.
What is the right way to install a thermostat on a 1983 diplomat which part of the thermostat is facing toward the engine?
The larger part with the spring on it goes towards (in to) the engine.
How do you change the thermostat on a 1997 Honda CR-V?
Locate the top radiator hose, find where it connects to the engine,there is a housing that the hose connects to. Inside the houseing is the thermostat, pay particular attention to the direction the thermostat is place in the intake side of it. Then reverse the procedure. The part is inexpensive.
Where ia the thermostat on a 1995. Ford Explorer?
Follow the top radiator hose from the radiator , it connects to a metal pipe which is part of the engine thermostat housing that is bolted to the front of the engine . The engine thermostat is inside the thermostat housing
Where is the thermostat located in a 1996 ford explorer?
On your 4.0 liter V6 engine : Follow the top radiator hose from the radiator , it connects to a metal pipe which is part of the thermostat housing which bolts to the front of the engine The engine thermostat is inside the thermostat housing
Where is the thermostat located on a 93 ford explorer?
Follow the top radiator hose from the radiator , it connects to a metal pipe which is part of the thermostat housing which is bolted to the front of the engine . The engine thermostat is inside the thermostat housing
How would you put a motorcycle engine in a rear end of a gocart?
You usually have to cut out the part of the motorcycle frame that connects to the engine, then weld that to the go kart frame.
Where the thermostat is located on 1996 ford explore?
On the 4.0 liter OHV - V6 engine follow the top radiator hose from the radiator , it connects to a metal pipe which is part of the thermostat housing that is bolted to the front of the engine . The engine thermostat is inside the thermostat housing
