Wood has relatively low tensile strength - about 7 MPa (6000 psi) compared to say steel which is 70MPa (60,000 psi) or more.However, wood has a higher strength to weight ratio than most other materials since it has such low density.
High Tensile Steel (HTS) is generally used for prestressing tendons.
High strength tensile bolts are used for extreme projects the types of things you cannot risk falling apart. They are typically made out of steel.
The alloy used for welding should be similar in strength to the bulk material being welded. Otherwise there will be stress concentration at the junction between the two alloys. This problem is somewhat reduced when the metals mix during welding, if the weld point moves slowly enough.
High tensile steel may have ten times the tensile strength of wood, and more than twice that of mild steel, but it would be a mistake to overestimate the importance of this single quantity, as Fuller seems to do
The tensile strength of some thing is it's ability to withstand pulling. For instance, the polymers of Kevlar are tightly bound therefore it has a high tensile strength because it does not easily pull apart.
High tensile steel is strong steel. It is 10 times stronger than wood and more than twice the tensile strength of mild steel. High tensile steel is commonly used in highway guardrails.
what are the properties of a high tensile brass
Wood actually has an extremely low tensile strength, especially when compared to almost any other building material.
High Tensile Steel (HTS) is generally used for prestressing tendons.
High tensile steel put simply is used where structures require high tensile strength. Tensile stress is where the forces on a material are "pulling" from each end away from the centre. Steel can be alloyed with certain materials such as aluminum to create a material that is stronger under tensile loading. An example of where high tensile steel is required is the cables of the ANZAC bridge that support its deck. Hope this helps..
Liquids do not have tensile strength. The equivalent property is viscosity.
No
High tensile is use to vehicle chassis in order to prevent the chassis for bending during heavy loads and for collision purposes.And also high tensile is more light,comfortable, and has a strong strength compare to low tensile and mild steel.
Grades of high tensile steel are based on their tensile strength and heat resistance. The best of these are used in axles and other high stress constructions that are required to operation safely.
high tensile stainless steel
parana pine wood is one of the most tensile materials on the planet
High tensile bolts are used , where maximum tension is possible in structure as in PEB structure rafter, or Hanging parts.