0
Workforce refers to the group of people employed by a company or organization, while load typically refers to the amount of work or demand placed on a system or individual. These two concepts are related but not interchangeable: workforce represents the people performing the work, while load represents the work itself.
What else can I help you with?
How much force will it take to do work on a 70N load?
To calculate the force required to do work on a 70N load, we need more information about the distance over which the work is being done or the work being done. The equation for work is Work = Force x Distance x cos(theta), where theta is the angle between the force and the direction of motion.
What is the relationship between input force output force and load force?
The input force is the force applied to a system, while the output force is the force produced by the system. The load force is the force exerted by the load on the system. In an ideal situation, the output force is equal to the input force, but in reality, due to factors like friction and mechanical efficiency, the output force may be less than the input force. The load force is the force that the system must overcome to perform work.
If a load of mass 10n stretches a cord by 1.2cm what is the total work done?
The work done by the load can be calculated using the formula: work = force x distance. In this case, the force is the weight of the load (10 N) and the distance is the stretch of the cord (1.2 cm = 0.012 m). Therefore, the total work done is 0.12 Joules.
How do levers reduce the amount of force needed to work?
Levers work by multiplying the force applied to them. They do this by increasing the distance between the applied force and the pivot point. This allows a smaller force to lift a larger load.
What is a push or pull on a lever that move the load?
A force or effort applied to a lever can cause it to move and lift a load. This input force generates a turning effect known as torque, which enables the lever to overcome the load's resistance and perform work.
How do you find the effort force if you already have the load force and the distance moved by load force?
work (effort) equals load times distance
How much force will it take to do work on a 70N load?
To calculate the force required to do work on a 70N load, we need more information about the distance over which the work is being done or the work being done. The equation for work is Work = Force x Distance x cos(theta), where theta is the angle between the force and the direction of motion.
What is work done by a coolie walking on a horizontal platform with a load on his head?
The work done by the coolie is zero because the force he exerts is in the vertical direction (lifting the load against gravity) while the displacement is in the horizontal direction. Work is only done when the force and displacement are in the same direction.
What is the relationship between input force output force and load force?
The input force is the force applied to a system, while the output force is the force produced by the system. The load force is the force exerted by the load on the system. In an ideal situation, the output force is equal to the input force, but in reality, due to factors like friction and mechanical efficiency, the output force may be less than the input force. The load force is the force that the system must overcome to perform work.
How does a simple machine make a hand brake work?
A simple machine uses a single applied force to do work against a single load force. Ignoring friction losses, the work done on the load is equal to the work done by the applied force. They can be used to increase the amount of the output force, at the cost of a proportional decrease in the distance moved by the force.
What is dependancy load?
Dependency Load is a portion of the population that is not in the work force; Total people under 14 and over 65.
A fulcrum is on the left side of a board as it is moved to the right will the force be the same?
Work: The work done by the force is the same as the work done on the load in an ideal simple machine.
How does input force output orce and load force work together in a lever?
because if there wasn't an input force, or any one of those, the machine would not work properly
If a load of mass 10n stretches a cord by 1.2cm what is the total work done?
The work done by the load can be calculated using the formula: work = force x distance. In this case, the force is the weight of the load (10 N) and the distance is the stretch of the cord (1.2 cm = 0.012 m). Therefore, the total work done is 0.12 Joules.
Work is done only if?
Work is done if a force moves through a distance. Eg Someone standing carrying a heavy load is not considered to doing work unless the load is moved
How do levers reduce the amount of force needed to work?
Levers work by multiplying the force applied to them. They do this by increasing the distance between the applied force and the pivot point. This allows a smaller force to lift a larger load.
What is load force?
The load force is applying a force to move or hold an object that has weight.
