540
Absolutely. four of the most basic machines do exactly that. A lever increases the force you exert by how close the fulcrum is to the object being move, and how far the applied force is away from the fulcrum. A screw transfers rotational force (torque) to a lifting force, and increases that force based on the pitch of the threads. A wedge increases lifting force based upon the pitch of the wedge from horizontal. A pulley, when using more than one, will increase the applied force, on an order of magnitude equal to the number of pulleys used. **Note: the total work applied equals the total work transmitted less friction. The force applied times the acceleration equals the work, the machines reduce the acceleration to increase the force transmitted.
The answer depends of the forces applied to the beam: - for a single-directional force, the answer is a hollow rectangular shape (with the force applied on the narrow face); an I-beam is the second best. - For forces applied in two perpendicular directions, the answer is a hollow square section. - For forces applied from any direction, the answer is a hollow circular bar - a pipe.
The strength of your arm is the applied force on a screwdriver.
It increases the applied force and changes its distance and direction. -Novanet
2.7 pounds force = 12 newtons (rounded)F = m AA = F/m = 12/5.5 = 2.18 m/sec2(rounded)
Multiply the number of square inches times the pounds per square inch. In this case, 5 x 50- or 250 pounds of force.
This is the equation for "work."
The acceleration depends on the net force. So, you must add the forces together as vectors. The result in this case depends in what direction the force is applied.
It is the impulse which equals the change in momentum.
the answer is 50 pounds.
He applied a force to the box and it moved. Force applied on it equals to the weight. As he lifts the point of application of the force gets displaced. Hence work is said to be done.
Friction force is equal to the force applied only when the object is not moving or it is just beginning to slide. Once the object has started motion completely, it means that the force applied has exceeded the frictional force
It's exactly 60 pounds for every square inch it's applied to.
Pressure of solid on a solidWhen you apply a force to a solid object, the pressure is defined as the force applied divided by the area of application. The equation for pressure is: P = F/AwhereP is the pressureF is the applied forceA is the surface area where the force is appliedF/A is F divided by AFor example, if you push on an object with your hand with a force of 20 pounds, and the area of your hand is 10 square inches, then the pressure you are exerting is 20 / 10 = 2 pounds per square inch.
No. That would violate Conservation of Energy.
The pound per square inch or, more accurately, pound-force per square inch (symbol: psior lbf/in2or lbf/in2or lbf/sq in or lbf/sq in) is a unit of pressure or of stress based on avoirdupois units. It is the pressure resulting from a force of one pound-force applied to an area of one square inch:
psi or per square inch is usually used to refer to the amount of force/pressure pressing against a square inch