When a lawn mower will not start by pulling the cord, it probably needs maintenance. Changing the spark plug often will fix the issue.
Try pulling out the spark plug and clearing the cylinder
There is a small cord on the mower. DO not put your stylus directly on the loop at the top of the cord. Put your stylus at the tip of the arrow pointing to the cord. You may have to pull several times before getting the lawn mower to start. Hope this helps you.
When you are moving your lawn with an electrical mower with a cord then you should travel horizontally from each end of your lawn. You should make sure that you are not turning your mower towards the cord, otherwise, the card will tangle.
You can start it by using the pull cord, just be sure the key is in the ON position.
sheared flywheel key. youtube has vids... type in mower cord backfires & you'll see instructions on how to fix it.
The pull cord of a lawn mower is used to manually crank the engine to get it started. As the engine is quickly turned, a spark is created which begins combustion.
No the pull chord will not cause the pull cord to be tight. The coil on the lawn mower will cause the compression to be tight.
Check the underneath of lawn mower for grass built up.
get a new one
An electric lawn mower has advantages over gas and push mowers. It does not require gas and are cheaper. However, there is always a risk of running over the electrical cord.
no the pull cord could froze see if the flyweel itself moves if it doesnt then yes it is locked
hurt no, if you pulled your cord and it jerked your arm and hurt you have a shear fly wheel key.