A micrometer caliper is a measuring device for finding very exact measurements of an item. The least count of a micrometer caliper in millimeter is 0.02.
In case for micrometer, principle of pitch is used. Least count could be even micro meter But in vernier caliper, difference of main scale division and vernier scale division is the principle Least count could be 0.02 mm
The least count of vernier caliper is 0.01mm while the least count of screw gauge is 0.001 mm. ... Difference between screw gauge and vernier caliper in tabular form. Micrometer Screw Gauge Vernier caliper It has a circular scale. It has a vernier scale. It rotates to measure the objects. It slides to measure the length.
In general in any screw type instrument such as spherometer or screw gauge or micrometer the least count = pitch / no of head scale divisions Spherometer has an advantage of finding the depth in case of curved surfaces.
Least count of vernier caliper= 1 MSD - 1 VSD. Main scale usually would have 1 mm as the minimum division. Such 9 divisions, ie 9 mm would be divided into ten equal parts in the vernier. So VSD = 0.9 mm Hence the least count = 1 - 0.9 = 0.1 mm If the same is to be given in centimetre, then it will be 0.01 cm.
First we keep the body in between the jaws of the caliper. Then we note the main scale reading and then vernier coincidence. Vernier coincidence is to be multiplied by the least count of the device. This is added with the main scale. That will be the required value of the dimensions of the object.
*Micrometer have a rotary handle and whereas vernier have a slider. *Micrometer is for measuring diameters while vernier is for measuring inside & outside diameter as well as depth. *Least Count of Vernier Caliper is 0.02mm *Least Count of Micrometer is 0.01mm
In case for micrometer, principle of pitch is used. Least count could be even micro meter But in vernier caliper, difference of main scale division and vernier scale division is the principle Least count could be 0.02 mm
99
least count for micrometer is 0.01mm0.01 mm
LC FOR VERNIER CALIPER-0.1mm LC FOR MICROMETER -0.01 mm L.C- NO OF SMALLEST DIVISION ON MAIN SCALE ------------------------------------------------------- TOTAL NO OF DIVISION ON VERNIER SCALE
digital micrometer least count calculation
least count of a micrometer= pitch/no of division on the circular scale
The least count of the micrometer screw can be calculated using the formula given below: Least count = 0.01 mm
hhih
LC FOR VERNIER CALIPER-0.1mm LC FOR MICROMETER -0.01 mm L.C- NO OF SMALLEST DIVISION ON MAIN SCALE ------------------------------------------------------- TOTAL NO OF DIVISION ON VERNIER SCALE
The least count of vernier caliper is 0.01mm while the least count of screw gauge is 0.001 mm. ... Difference between screw gauge and vernier caliper in tabular form. Micrometer Screw Gauge Vernier caliper It has a circular scale. It has a vernier scale. It rotates to measure the objects. It slides to measure the length.
0.001