You can access the brake light bald through the trunk compartment. Remove the trunk liner from the tail light assembly. Push the brake light connector in and turn at the same time. The brake lightbulb will come out. Reverse the process to install the new brake light
Follow the link below, labeled "How to replace a Lexus IS300 tail light"
From what I know (doing my own troubleshooting). It means you need to take it in to get your brake pads replaced.
you dont you get a new car
The fuel capacity for a Lexus LS400 is 22.5-gallons. The low fuel light comes on when there are around 2-gallons of fuel left in the tank. The Lexus LS400 gets around 24-mpg on the open highway.
y
remove bulb from in side the boot
Lexus IS300 3rd brake light is changed from the back seat. Pry the light up and disconnect wiring. Replace bulb and put back together. Easy job
The brake light assembly can be access through the cargo compartment. Remove the cover to the brake light assembly. Take hold of the brake light connector, push in and turn at the same time. The brake light will come out. Reverse the process to install the new brake light.
Looking for Lexus ES300 engine 1993
If your engin light also is on, you need new oxigen sensors!
To replace a brake light on a 2003 Lexus SC 430, first, open the trunk and locate the tail light assembly. Remove the plastic cover by twisting the retaining clips, then pull out the light bulb socket by turning it counterclockwise. Replace the old bulb with a new one, ensuring it's securely in place, then reassemble the socket and cover. Finally, test the brake light to ensure it’s functioning properly.
The center brake light bulbs can be replaced by lifting up on the rear light assembly and pulling towards the front of the car. www.lextechautomotivellc.com