Begin by removing the wiring harness from your third brake light. Remove the third brake light retaining screws. Reverse the process to install your new third brake light.
how to change third or center brake light on Chevy beretta 95
How to change third brake light in 2009 Hyundai sonata
From inside the trunk.
the third brake light is direct from brake light switch no fuse
if you have a Nakamichi sound system i assume you have a speaker grill before the third brake light by the back window. If so, no problem. Just stick a flat head screwdriver under it and prye it open. Once it opens its easy from there, the difficult part is prying the grill/light open.
carefully
To change the third brake light bulb in a 2001 Kia Sephia, first, open the trunk and locate the plastic cover where the third brake light is situated. Remove the cover by unscrewing any screws or unclipping it. Once exposed, twist the bulb socket counterclockwise to release it, then pull out the old bulb and replace it with a new one. Reinsert the bulb socket, secure the cover back in place, and your third brake light should be functioning properly.
Vehicle year not given. In general however... Lexus LS400 center high mount stop (third 3rd brake light) light bulb lamp replacement procedure: Purchase the correct replacement center high mount stop (third 3rd brake light) bulb(s) first, before disassembling the vehicle. See the Sources and Related Links section below for replacement bulb information and full light bulb part numbers list. Then consult your owner's manual for the center high mount stop (third 3rd brake light) bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. If there are multiple bulbs, you may want to consider replacing all at the same time in order to keep brightness and color equal (optional).
2002 Lexus LS430 center high mount stop (third 3rd brake light) bulb replacement: Purchase the correct replacement center high mount stop (third 3rd brake light) bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the center high mount stop (third 3rd brake light) bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. If there are multiple bulbs, you may want to consider replacing all at the same time in order to keep brightness and color equal (optional).
I assume you only need to change the bulbs. Go into the trunk and look up. You should see the wires leading to the mounting point for the third brake light, you candisconnect the connectors and then change the bulbs this way.
To change the third brake light on a 2002 Hyundai Accent, first, open the trunk and locate the plastic cover for the brake light. Remove the cover by unscrewing or unclipping it, depending on your model. Next, disconnect the wiring harness from the brake light assembly, then remove the old bulb by twisting it counterclockwise. Finally, insert the new bulb, reconnect the wiring harness, and replace the cover.