carefully
ratchet or socket
Changing the brake light switch in your Chevrolet Monte Carlo is quite simple. The brake light switch simply plugs in and out.
.The 2000 Chevrolet Monte Carlo brake caliper bolt size is 9/16. The brake caliper bolt can be purchased at most auto-parts stores
The brake light switch is bad, look on top of the brake pedal under the dash and you will see the switch, replace it and you will have brake lights.
Yes, but I'd say they took the whole car. However i don't know if they were recalled.
Remove the tire and wheel. Remove the brake pad springs and hardware. Remove the brake rotor. Reverse the process to install the new brake and rotor.
DOT 3 fluid is used. You should only use DOT 3. It will say on the bottle.
You may have to change the sensor, it's a $9.00 part at autozone.
dot 3
Rear loom ground not contacting. Bulbs burned out or missing. Brake light switch or connection to it is fubared.
Brake light switch on the brake pedal is defective
It should be in the fusebox with the rest of the fuses.