The main breaker is not based on the HP of the motor it is based on the FLA of the motor. Many different motors have different characteristics and all of the different motors have different amperages Once you have the amperage of the motor the breaker is 250% times the FLA of the motor.
Add up your amps to calculate your breaker size. Add up your loads (amps), divide by 0.8, and choose that size breaker. If that number does not correspond to a standard size breaker you go to the next higher standard size breaker.
For a standard size refrigerator, a dedicated 15 amp circuit is used.
A circuit breaker is a switching device which can make,brake and carrying (or trip the circuit) that specified over currents for a small interval of time . There is a different types of Circuit Breaker's are there 1.According to their arc quenching media these are divided into 4 types a) Oil circuit breaker b) Air blast circuit breaker c) SF6 circuit breaker d) vacuum circuit breaker 2. According to their services the circuit breaker can be divided as a) Outdoor Circuit Breaker b) Indoor Breaker 3. According to the operating mechanism of circuit breaker they can be divided as a) Spring operated Circuit Breaker b) Pneumatic Circuit Breaker c) Hydrolic Circuit Breaker 4. According to the voltage level of installation these are divided into 3 types a) High Voltage Circuit Breaker b) Medium Voltage Circuit Breaker c) Low Voltage Circuit Breaker.
The circuit breaker for the headlights is intergrated with the headlight switch.
There are several circuit breakers in that vehicle, need to know which one you are looking for.
The NEC requires that if the intended rating of a circuit corresponds to a standard size breaker then that size breaker must be used. In most instances, "rating of a circuit" means the intended connected load plus 25%. If the intended rating of a circuit does not correspond to a standard size breaker, you can go up to the next standard size without any other adjustments. In most circumstances, besides what I've already stated, a 14 gauge copper wire cannot be connected to a breaker larger than 15 amps, 12 gauge copper to a 20 amp breaker, and 10 gauge copper to a 30 amp breaker.
handling the circuit breaker
is there an error if the upstream circuit breaker is 16A TP and the downstream circuit breaker is 16A TPN?
Where I'm from, it's called a "circuit breaker".A circuit breaker.
No, a circuit breaker is a safety device that is used in a circuit to limit the amount of current in an overload or short circuit condition. The number on a breaker is the top end current that the breaker will handle before opening the circuit.
A non-auto circuit breaker is a circuit breaker with the trip element removed. Basically, it is a modified circuit breaker that is now a disconnect switch (glorified disconnect switch).
A standard circuit breaker will sometimes (but not necessarily) trip in such a situation because the amperage exceeds the rating for that breaker. A ground fault interrupt breaker will invariably trip because the amperage on one side of the circuit significantly exceeds the amount returning on the other side of the circuit.