0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Can you use a 250 watt bulb with a 15 amp switch?
A 15 amp switch can safely handle up to 1400 resistive watts.
How much does a new starter switch for a Craftsman 7500 watt generator cost?
Starter Switch - Part# 77282GS - $41.32+s&h
Can you use 250 watt bulb in a 150 watt lamp?
Yes, but the bulb will only operate at 60 watts and only in one of the switch positions. To shut the bulb off you will have to switch through the other two positions.
How many watt in 5 amp switch normally use in home?
The switch will use no wattage whatsoever. The load on that switch is what uses power. If you know the load is 5 amps then 5 amps at 120 volts is 600 watts.
How many giga watts is a exa watts?
there is one Giga Giga watt in one Exa watt. So one Exa watt = one Giga Giga watt or 109 Giga watt or one Exa watt = 1018 watt and one Giga watt = 109 watt then one Exa watt = 109 Giga watt or one Exa watt = one billion Giga watt = one thousand million Giga watt
What has the author Thomas H Marshall written?
Thomas H. Marshall has written: 'James Watt 1736-1819'
What amplifiers does Adrian smith use?
He uses a Marshall DSL100 amplifier with two 300-Watt Marshall 1960A Angled-Front 4x12 Cabs and in these cabinets there are 75-Watt Celestion G12-T75 Speakers.
Can you use a Marshall MG100HDFX head to power two 1x10 cabinets from a Marshall MG15MSII Microstack setup?
I use mine to power a 4X12 Ampeg 200 Watt
What are five light floor lamps?
Lamps with five flexable lights that provide great lighting and come with shades and four way switches. The information below is telling you how brite the light will be if you used the same number watts in the lamp. Using 15 watt bulbs Using 30 watt bulbs Using 40 watt bulbs Using 60 watt bulb Switch 1: 30 watts Switch 1: 60 watts Switch 1: 80 watts Switch 1: 120 watts Switch 2: 45 watts Switch 2: 90 watts Switch 2: 120 watts Switch 2: 180 watts Switch 3: 75 watts Switch 3: 150 watts Switch 3: 200 watts Switch 3: 300 watts Switch 4: 0 watts Switch 4: 0 watts Switch 4: 0 watts Switch 4: 0 watts
How much does a new starter switch for a Craftsman 7500 watt generator cost?
Starter Switch - Part# 77282GS - $41.32+s&h
Can you use a 250 watt bulb with a 15 amp switch?
A 15 amp switch can safely handle up to 1400 resistive watts.
Difference in dimmer switch heat 600 watts or 1000 watts?
A dimmer switch is used for lighting loads and not heating loads. The wattage rating on a dimmer switch is what the manufacturer recommends as the maximum load that the switch can handle. For example if you have ten 100 watt lamps, the total load wattage would be 1000 watts (10 x 100). Too much load for a 600 watt rated dimmer switch but not for a 1000 Watt rated dimmer switch. So you can see that the rating on a dimmer switch governs the maximum wattage load that can be connected in the circuit that is to be controlled.
Can you use 250 watt bulb in a 150 watt lamp?
Yes, but the bulb will only operate at 60 watts and only in one of the switch positions. To shut the bulb off you will have to switch through the other two positions.
How many watt in 5 amp switch normally use in home?
The switch will use no wattage whatsoever. The load on that switch is what uses power. If you know the load is 5 amps then 5 amps at 120 volts is 600 watts.
Does a 1000 watt single pole switch require different wiring than a 600 watt switch?
not unless the wire is exceptionally small, if if is 12 AWG or even 14 AWG you will be ok unless you are using it for a transmission line (unlikely) The smallest wire you can use safely is a 21 AWG wire but that's not a wire used in the walls
Will your 100 watt marshall guitar amp be loud enough for a gig?
100 watts should be good for small to medium rooms. Of course, it also depends on how "hot" your guitar pickups are.
Spl z2x-1200 1200 watt amp and two kdc-w3o11 1200 watt 12 in subs Can someone tell me the best configuration for wiring and settings on the side of the amp to give my subs the best power?
crutchfield has a wiring diagram for all kinds of configurations, check it out.
