0
Masses of 300 and 350 g are suspended at the ends of a cord passing over a frictionless pulley find the distance the masses will travel from rest position at the end of 2 seconds?
Wiki User
∙ 14y ago
Using F = MA and d=v0t+1/2at2
we get 1.538 meters.
... I think. It's been a long time since I've done one of these.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What is the tension in the string of the hockey puck?
A hockey puck of mass m = 0.25 kg is tied to a string and is rotating horizontally in a circle of radius R = 1.0 m on top of a frictionless table. The string is passing through a hole in the center of the table with a mass of 1 kg hanging vertically downward below the table. If the 1 kg mass hanging below the table remains in equilibrium (at a fixed position) while the puck is rotating horizontally. Since the weight below the table remains in equilibrium, the tension in the rope must equal the weight suspended from it T = W = (1 kg) × (9.81 m/s2 ) = 9.81 N
How a galvanometer works?
Electricity passing through a wire coil creates a magnetic field which twists a suspended magnet and mirror. A light beam reflects off the mirror and onto a scale.
The graph of distance versus time for an object moving at a constant speed is a curve?
No, it is a straight line passing through the origin.
Why does the temperature of the day change?
because with passing day,the position of the sun and the intensity of heat changes on various parts of the earth. as the earth rotates round the sun the front portion of it facing the sun changes with a very slow speed.....
200 d for passing g in m?
200 dollars for passing go in monopoly
Two frictionless objects a and b whosemass is 8 kg each are linked by a cord passing over a frictionless pulley if 0.40 is shited from b to a what acceleration result and what is tension of cord?
You left off a pretty critical "f" in one of your words. Be careful. I'd have to see the diagram. And also 0.40 what? You need units.
When passing parked vehicles in what position in the lane should you be in?
on the center of the road
What is the tension in the string of the hockey puck?
A hockey puck of mass m = 0.25 kg is tied to a string and is rotating horizontally in a circle of radius R = 1.0 m on top of a frictionless table. The string is passing through a hole in the center of the table with a mass of 1 kg hanging vertically downward below the table. If the 1 kg mass hanging below the table remains in equilibrium (at a fixed position) while the puck is rotating horizontally. Since the weight below the table remains in equilibrium, the tension in the rope must equal the weight suspended from it T = W = (1 kg) × (9.81 m/s2 ) = 9.81 N
In football what is the position rcb?
Right Cornerback. That is a defensive position whose main responsibility is to cover a wide receiver on passing plays.
If Passing a very hard hit ball from a position close to the floor is a?
Its called a dig.
What is the distance between Seychelles to England?
22 miles north, passing mcdonalds and past the M25. :)
What position in football gaurds the catcher?
For deep passing routes, the cornerback is typically responsible for covering the receiver.
What is the radiu and diameter of circle?
The radius is the distance from the center to the outside. The diameter is the distance from the outside to the outside, passing through the center - in other words, twice the radius.
What is the difference from circumference and diameter?
In the case of a circle: Diameter: The distance through the circle - from one end to the other, passing through the center. Circumference: The distance around the circle.
If the radius of a circle is 18 inches what is the diameter?
36 inches. The radius is the distance from the centre to the outside or circumference and trhe diameter is the distance across passing through the centre. Therfore the diameter is twice the distance of the radius.
How a galvanometer works?
Electricity passing through a wire coil creates a magnetic field which twists a suspended magnet and mirror. A light beam reflects off the mirror and onto a scale.
How galvanometer work?
Electricity passing through a wire coil creates a magnetic field which twists a suspended magnet and mirror. A light beam reflects off the mirror and onto a scale.
