Replace fuse 33
Turn ignition on and off quickly 4 times, remove key from ignition, you will then hear tone, point ignition key towards interior light and operate the central locking. This will reset it.
A vacuum pump in car central locking systems is a device that creates a vacuum to operate the door locks. It generates negative pressure, which is used to actuate vacuum-operated door lock actuators, allowing the locking and unlocking of doors. This system is often found in vehicles with central locking features, where the pump activates when the driver uses the key fob or manual switch. By using vacuum pressure, the system can provide a reliable and efficient means of controlling multiple locks simultaneously.
There is no built-in display screen on the 2002 model of the Mercedes Benz (M-B) C240, other than the LED dash display. The dash display automatically turns on when the key is turned in the ignition, and is operated by buttons on the central console.
Sit in the car with the doors closed and the key in your hand. Press the interior central locking button and hold it in until the doors lock and then unlock, you the have 10 seconds to press the plip button on your key to re synchronise and operate the remote central locking. you can do it at home you need the 4 dig code for you car if you have that get back to me and i will tell you how to do it i did mine at home owljay35@hotmaill.co.uk
If you have recently changed the battery, you may have issues with the key fob operating the locking system. The key fob must be reprogrammed, which you can do yourself first before taking it to a shop.
one of your doors or bonnet not shut we had the same problem but they will only flash on double locking
the fob may need recoding to the vehicle, if you still have the second fob then point and operate this fob at the receiver (by the interior mirror) and operate the faulty fob at the same time, this should bring the second fob back into sinc. robb
To operate the convertible top on a 2006 CLK Mercedes, ensure the vehicle is in a safe, level position and that the ignition is on. Pull the convertible top switch, typically located on the center console, to release the latches and lower the top. Hold the switch until the top is fully opened or closed, and make sure to check that the latches engage securely when the top is closed. Always refer to the owner's manual for specific instructions and safety precautions.
It is to distribute the signals from the electronic control module to operate the coils.
The central processing unit interprets and carries out the basic instructions that operate a computer. The central processing unit is frequently abbreviated as CPU.
The coil is supplied power by the ignition, remove the wire and it will not operate.
The ignition switch has to be on for the ABS to operate.