If the warning lights will not turn off it could be the on and off switch. It could also be the relay switch.
If you have a 1997 Mercedes Benz e420 but you are unable to turn off the esp button, it could be having a transmission fluid problem.
The warning lights are warning indicators meant to indicate something being wrong. When the lights turn red, it means it is in immediate need of attention.
rotate the end of the turn signal counter clockwise
if you cant figure out what the warning is for, you can go in the fuse box of your vehicle and you can take out each one until you find the one that controls the warning lights
It depends on what lights, did you turn on a switch, open a door, If they are dash warning lights, you have a malfunction.
The beeping is a warning that the lights are on, so the answer is turn the lights off.
It is not a warning light. The DRL stands for Daytime Running Lights and will always be on unless you turn on your dashboard lights.
To reset the warning lights on a 2000 Jaguar XK8, first ensure that the issue triggering the warning is resolved. Then, turn the ignition to the "On" position without starting the engine. Press the gas pedal to the floor three times within five seconds. Finally, turn off the ignition and start the engine to see if the warning lights have reset.
To turn on the fog lights on a 2001 Mercedes SLK320, first ensure the vehicle is in the "On" or "Run" position. Then, locate the headlight switch on the left side of the steering wheel. Turn the switch to the first position (headlights) and pull it towards you to activate the fog lights. If the fog lights are functioning, an indicator light will illuminate on the dashboard.
To turn off the hazard warning lights on a Citroën C5, simply press the hazard warning light button, usually located on the center console, marked with a triangular symbol. If the lights do not turn off, ensure the vehicle is in the "On" or "Run" position and try pressing the button again. If issues persist, there may be an electrical fault that requires further inspection.
pull on the light switch after you have turned on the regular lights. answer by pgmr
To turn on the dash lights in a 1992 Mercedes 190E, locate the headlight switch on the left side of the dashboard. Rotate the switch to the right until you hear a click, which activates the parking lights and dashboard illumination. If the lights still do not turn on, check the dimmer switch (often integrated with the headlight switch) to adjust the brightness of the dash lights. Ensure that the vehicle's ignition is in the "on" position for the lights to function.