In plate earthing we make chamber whose depth should be app. 2.5 to 3 mtr and dia should be app. 600 mm(as per plate size).we insert a cu/GI plate as per required size (app. 600x600x3/5) and two cu/GI strip should be attached vertically with this plate which should be properly bolted.Among these strips we fixed a GI pipe whose dia. app. 2.5"placed centrally for filling water.Then fill salt,
coal and soil in this chamber.
Finally make a flap on this chamber for protection and maintenance work
An earthing system can be defined as the electrical potential of the conductors relative to the EarthÍs conductive system. The choice of earthing method can influence the safety and electromagnetic compatibility of the power supply, and regulations can vary considerably among countries.
Chemical Earthing and Conventional Earthing are different types of earthing techniques. Conventional Earthing is based on plate earthing and pipe type earthing but Chemical Earthing on GI or Copper.
TT system is normally used for consumer power supply.No earthing system provided by power distributor.The owner must install the earthing protection by their own connection to the earth.They must installing a suitable electrode and safe arrangement for which they are responsibility to their installation.
Electrical earthing is classified into many types as Neutral earthing Body earthing Pipe earthing Plate earthing Chemical earthing Ground Compound Earthing
Earthing?
An earthing boss and earthing lug are parts of a grounding connection. An earthing boss is in a casting that allows for the drilling and tapping of hole. A earthing lug is used to bond a wire to the ground.
System Earthing is the earthing associated with current carrying conductor & is essential for the security of the system. Equipment Earthing is the earthing associated with non-current carrying metal work & is essential for the security of human life and property.
only earthing can not be measure. Anyone can only measures the voltage and the current with respect to the earthing .Thus it is impossible to measure the earthing.
it is also same as earthing lugs,there is no differenence earthing lugs ang lugs earthings.
The map may not have anoth of the things u needed to see
in this method a galvonise iron pipe of 38mm internal dia 2.5 mt lenght having 12mm dia holes on its surface
Ashlock earthing is required to ensure the safe and effective grounding of electrical systems, particularly in high-voltage installations. It helps to prevent electrical shock hazards, equipment damage, and ensures the proper operation of protective devices. By providing a low-resistance path for fault currents, ashlock earthing enhances the overall safety and reliability of electrical systems. This method is especially important in areas with high soil resistivity, where traditional earthing methods may be insufficient.