answersLogoWhite

0

you can remove the therostat as long as you do not need heat. the water runs through and keeps it cool. check the water every four days it will use more.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

Reset oil change light on 2001 Dodge Intrepid?

A 2001 Intrepid does not have an oil change light.


How do you change antifreeze on vauxhall vectra?

how to change antifreeze in vauxhall vectra B


How do you change the antifreeze on a 2004 expedition?

How do you change the antifreeze in a 2004 Eddie Baurer ford Expedition.


How do you Change oil sensor switch 2000 dodge intrepid?

how to change oil pressure switch in 2001 Dodge Intrepid I need to look at a diagram


How do you change water pump on 3.5 liter intrepid?

How do I change the oil pan gasket on a 1999 Dodge Intrepid with 3.5 engine, what is the proper torque for the bolts.


How do i Change antifreeze on 2000 Mercury Sable?

Drain radiator, rinse with water or radiator cleaner, then refill. Don't forget to check the leve after running the engine a while.


How do you change antifreeze in a Mercedes?

To change the antifreeze on a Mercedes, locate the drain plug on the bottom of the radiator. Drain the fluid into a pan and refill it.


How do you change a themostat in 1986 Toyota MR2?

Pictures and instructions are found here: http://www.padandwheels.com/mr2/thermostat/thermostat.html


How do you replace a thermostat on a 94 grand am 2.3 liter?

information on how to change the themostat on a 94 Pontiac Grand am SE 2.3 liter


97 intrepid 3.5L FIT IN A 99 DODGE INTREPID?

Yes they will , just change around the valve covers and intake from the new to the old.


How do you change the antifreeze on a Peugeot 406?

To change the antifreeze on a Peugeot 406, start by ensuring the engine is cool and then open the radiator cap. Place a container beneath the radiator, remove the drain plug, and let the old antifreeze drain out completely. Flush the system with water if desired, then close the drain plug and refill the radiator with a suitable mix of antifreeze and water, ensuring to bleed any air from the system by running the engine with the heater on until it reaches operating temperature. Finally, check for leaks and ensure the coolant level is correct.


How do you change the fan blower motor on a 1998 Dodge Intrepid and how hard is it to change?

dont have a clue :)