Hello, I had the same trouble with my 55 Chrysler. The motor had sat for 2 years prior to me buying it. Ichecked, and had power at the both coils, just one was not trigering. I tracked it to the points not snaping closed properly. I cleaned them up, and reset them and got the spark back. Good luck.
The approximate weight of a 90hp Chrysler outboard motor is 280 pounds.
248lbs is the weight of 115 hp chrysler outboard motor
should be at least 100 PSI and the difference between cylinders should be less than 10% of each
You can find customer reviews/ratings for Chrysler outboard motors on the Marine Engine website. Amazon also offers customer reviews on Chrysler outboard motors.
optimally at least 100 psi on each cylinder, but the most important thing is that both cylinders are 5% within each other.
50.6
I have a bad cylinder on my mercury outboard 200 h.p. can I just replace the bad cyliner without rebuilding the entire outboard.
A 1975 Chrysler 30hp outboard requires a 50:1 fuel to two cycle oil mix.
The point setting on a 30hp Chrysler outboard would be .020in. if you are refiling your old points they should be set at .018in
275 lbs
50 to1
It is the highest cylinder. (Starboard top cylinder)