0
My toro 22 in cut mower electric start does nothing when i turn the key on altho the recoil starter works ok can you tell me what might be the problem?
Have you used the wall charger to charge up the battery on your Toro? It should be done a couple times per season and at the end of the season. You will need to locate the charger that came with your mower when you purchased it, the unit resembles a cell phone type charger. You can also purchase a new one at the dealer. I notice your Toro is a 22 inch, that tells me you did not purchase it at a dealer. It was purchased at a large box store such as Home Depot. They do not provide service but a dealer may assist you. It is likely that you will be a low priority vs. their customers and others that used the dealer network and purchased the much higher quality product sold at the dealers and the service that comes along with that purchase.
To summarize, locate or purchase the charger for the starter battery and charge it for 24 hours. It is also possible the battery is defective. They normally last 4 or 5 seasons.
What else can I help you with?
What starter on the Tecumseh HM80?
It has a recoil starter.
Where is the optional auxiliary recoil starter for 2007 Honda rancher es located?
The optional auxiliary recoil starter for the 2007 Honda Rancher ES is typically located on the left side of the engine, near the front. It is designed to provide a manual starting option in case the electric start fails. You can identify it by a plastic cover that can be removed to access the recoil starter mechanism. Always consult the owner's manual for specific details and safety instructions related to your model.
How do you repair recoil starter on polaris 325 magnum?
To repair the recoil starter on a Polaris 325 Magnum, first remove the recoil starter assembly by unscrewing it from the engine. Inspect the starter rope for frays or breaks, and replace it if necessary. Check the spring mechanism for proper tension and ensure it is not damaged; if it is, you may need to replace the recoil spring. Reassemble the starter, ensuring everything is properly aligned and secured before reinstalling it on the engine.
How do you put spring in Honda recoil starter?
Ultimate Washer is the place to come for Honda small engine parts. ... If the recoil starter cord on your Honda engine breaks, don't take it to a local shop for repair. ... Starter Spring, SN-150-715 Recoil Flange Bolt, SN-140-401 Starter Handle ..
How do you rewind the recoil starter on a craftsman rototiller?
To rewind the recoil starter on a Craftsman rototiller, first, remove the starter cover by unscrewing it. Next, pull the rope out to its full length and then turn the recoil spring clockwise several times to create tension. Once tension is built, insert the rope back into the starter housing, ensuring it's properly aligned in the pulley. Finally, reattach the starter cover and test the recoil by pulling the rope to ensure it retracts smoothly.
Why is my Honda lawnmower's pull cord stuck and how can I fix it?
Your Honda lawnmower's pull cord may be stuck due to a few reasons, such as a tangled cord, a dirty recoil starter, or a worn-out recoil spring. To fix it, you can try untangling the cord, cleaning the recoil starter, or replacing the recoil spring if necessary.
How do you remove the recoil starter on a 1990 Polaris 250 trail boss?
To remove the recoil starter on a 1990 Polaris 250 Trail Boss, first ensure the engine is off and cool. Disconnect the spark plug wire for safety, then remove the screws or bolts securing the recoil starter cover to the engine. Carefully pull the recoil starter assembly away from the engine, taking care not to damage any attached components. Finally, inspect any gaskets or seals and replace them if necessary before reassembling.
How do you replace recoil spring on a weed eater?
To replace the recoil spring on a weed eater, first, ensure the engine is off and remove the spark plug for safety. Take off the recoil starter cover by unscrewing the screws holding it in place. Carefully remove the old recoil spring and install the new spring, ensuring it is properly seated in the housing. Finally, reassemble the recoil starter cover and reattach the spark plug.
What does it mean when there is no tension in the starter pull cord of a lawnmower?
the recoil spring is broken.
How do you replace a starter cord in a ryobi plt3043a trimmer?
To replace the starter cord in a Ryobi PLT3043A trimmer, first, remove the starter cover by unscrewing the screws. Carefully take out the recoil assembly and note how the old cord is wound. Cut a new starter cord to the appropriate length, thread it through the recoil assembly, and tie a knot at the end. Finally, wind the cord back onto the reel, reassemble the recoil assembly and starter cover, and secure everything with screws.
Which of the following is a component of a rope rewind starter system a recoil spring a wrist pin an air vane governor a fuel bowl?
Recoil spring
Where to you find polaris 1993 engine number?
There is a number on the recoil starter and the back of the engine .
