Want this question answered?
Passenger side right wall under the dash. You need to pull up some carpet to get to it.
dimmer switch is on the turn signal lever, to replace you need to remove steering wheel
Check fuse for parking/tailights Could be bad dimmer rheostat Could be bad headlight switch
The dash light dimmer switch is worn out. You need to replace it.
This is usually an indication that the dimmer switch is in need of replacement.
need to know the capacity of the dimmer and the size of the lights
To replace the headlight dimmer switch on an 87 Olds Delta 88 you need to open the instrument panel under the steering column. Next, remove the two screws holding the switch in place, remove old switch, and reverse directions to replace with new switch.
There is no need to bypass it. Just do not use it.
This simple if you have two switches controlling a set of light you will need to buy a three way switch. A three way switch will have a place for three connection. Depending on what brand of switch you purchase the directions will be sightly different but most dimmer come with detailed directions and diagrams. When you by a dimmer you need to read what kind of load it is meant to control. They are built to control incandescent light, magnet low voltage lights or electronic lights.
get in my belly
This is not extremely hard but you do need direction. Get a manual on your car from the parts store or DiSCOUNTAUTOREPAIRMANUALS.COM
You need a three way switch to control lights from two locations. The name is misleading. Three way switch refers to the connection points on the switch. You can use a three way switch as a single switch as long as you place hot wire on the brass screw and the use any of the other screws for the return hot.