0
What else can I help you with?
How do you change air vents on a vw beetle?
They are usually plastic welded in place in the back of the dash panel that they are connected to. You need to replace the entire dash piece or drill out the vent piece and plastic weld or glue in a replacement piece
Why is the back of the bolt plastic on the x bolt rifle?
Price
Can i glue a piece of Velcro t0 the back of a plastic cell phone?
Can I attach a piece Velcro to the back of a cell phone (plastic?) with Elmer's glue?
How do you re move the bolt from a western field m842a?
First you need to remove the stock, then behind the bolt is a plastic piece. There is a metal lever you pull down on it, after you pull it down pull the piece back while holding the lever. After the piece is removed open the bolt and pull it back.
How do you put the bolt action back into a rifle?
You need the services of a gunsmith.
How do you change a multi function switch on a 2003 Jeep Wrangler?
It is very easy... First...remove 2 Phillips screws which hold the lower plastic piece of the steering column...you do not need to remove this piece Next...remove the top plastic piece...easy plastic clips Now you see the multifuncton assembly...there are 2 wire connectors that need to be removed...first push back the little red locking clip...then remove the wiring harnesses Next...remove 2 Torx screws holding the assembly in place... Install the new assembly and put it all back together...should take about 30 minutes or less
What is the black piece of plastic the ref throws on the field after a touch back in the NFL?
It signals a change in possession of the ball.
Where is the bulb for the clock in a Acura tl 2003?
you have to pull the radio. once you do that remove the plastic panel. Then you will have to unscrew the clock from the plastic panel. There is a white piece on the back which is the bulb.
Where is the fusebox at on a 2007 BMW 335i?
in the glove box compartment (you have to take out the plastic piece in the back first by unscrewing two plastic easy to remove bolts) peace
How do you replace rear view mirror on 97 prelude?
All you need to do is pop off the gray plastic piece that frames the spot lights with a tiny screwdriver or something of the sort. There should be 4 screws laying beneath that plastic piece. Use a Phillips screwdriver to remove screws. Replace and hold the mirror with one hand and with the other hand screw the screw back where it came from. Repeat for the other 3 remaining screws. Align plastic cover, pop back in. That's it.
How do you change the radio system in a 1997 dodge avenger?
You have to take off the plastic covering surrounding the radio.....to do this simply go to the bottom of the plastic piece near the ciggarette lighter....you see where it meets another plastic piece???....start pulling up and away on that.....it will unclip itself and should pull out pretty easily.....then there are 4 screws that will need undone to pull out the radio....and then undo wires in back.....and the rest is up to you......
Can't get the bolt back in a browning a bolt rifle. 25-06 caliber?
You need a gunsmith
