The is no net charge when the carrying wire is at zero.
Surely but current direction has not to be parallel to magnetic field. Force on the wire = B I L sin@ When @ is zero, ie parallel then F = 0 If @ = 90 then force will be max. F = B I L Here L is the length of the current carrying conductor
it is a current which has zero drift and it is ugly
The object with zero charge is electrically neutral.
zero
zero. The net of a positive (p+) charge and a negative (e-) is zero (neutral).
Electrons or other charged particles are moved around; no new charges are created.
Surely but current direction has not to be parallel to magnetic field. Force on the wire = B I L sin@ When @ is zero, ie parallel then F = 0 If @ = 90 then force will be max. F = B I L Here L is the length of the current carrying conductor
Carrying Concealed Weapon, Zero Tolerance Carrying a weapon in a strict controlled area: government buildings, schools, etc.
Will cancel out and become zero
The magnetic field collapses to zero, then builds up again for the current in the opposite direction.
fkfjslk
The solar wind consists of equal parts of positive and negative charge, and the net current is zero.
The black wire is the hot wire through which the electrical current flows to the appliance. The left over voltage which is usually zero flows back to the main circuit panel through the white neutral wire where it flows to ground.
Electric current does not drop. Electric voltage, however, drops across a wire because the wire has non-zero resistance. (Do not confuse electric current with electric voltage - they are not the same.)The reason current does not drop is that, in a series circuit, according to Kirchoff's current law, the current at every point in a series circuit is the same.
A three-phase 4-wire system has three live wires and a neutral, which is earthed at at least one point at the transformer. All current-carrying wires are insulated in this system, for safety. The voltage on the neutral might be zero or only a volt or two, but under fault conditions its voltage could be much higher.
Making a load On, By using a clamp meter for measuring the current in the wires : we find a reading in Amps. if we clamp the neutral wire. and zero when clamping the earthing wire.
Charge buildup between the plates of a capacitor stops when the current flow through the capacitor goes to zero.