Obstruction in the hot water supply line, bad valve, or broken water line. Drain system and remove valve cartridge, open hot supply to blow out line and see if water comes out. If it does than you have a bad cartridge, if not broken line that needs to be repaired.
Your hot water pipes have rust in them.
it depends on what your hot water level is
Turn on your bathtub or shower hot then turn it off at last turn on your hot water for your sink. Hope this helps!
Yes, if they are tired or irritable. Or if the water is to hot.
You can get the shine back on an old porcelain bathtub by washing it with an all-purpose bathtub cleaner and then rinsing it clean with water. Next, pour several cups of vinegar into a bathtub of hot water and allow it to sit for a few hours. Rinse the tub with cold water then take a dry, soft cloth to buff the bathtub.
An average bathtub holds about 160 litres of water.
Running hot water in the bathtub is unlikely to kill a spider as they can usually survive in water for a period of time. It would be more effective to try to remove the spider using a cup or a piece of paper and release it outside.
Bad shower valve.
oviessly u go in your bath room and full up the bathtub with water :)
is there actually hot water plumbed to the tub?
May be an obstruction in the piping system. A total cleaning may solve the problem.
you have a bad valve its not letting the hot side open all the way.or it may have a limit disk that keeps it from getting too hot. try turning the limit disk its behind the handle