0
The 1997 Nissan Altima 2.4L is equipped with the RE4F04A 4-speed automatic transmission. This Transmission Fluid pan and gasket assembly has 21-bolt holes.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
What are the torque specs for a head on a 1998 Nissan altima 2.4?
What do you torque the head bolts on a 1998 nissan altima 2.4 l
Center console Nissan Altima?
The Nissan Ultima center console can be removed by removing the retaining bolts. There are four retaining bolts on the bottom of the console.
How do you get to the starter bolts on a 94 Nissan Altima?
You have to be underneath the car and have very nimble hands.
How many transmission bolts are there on a 1994 Nissan sentra manual transmission?
11 including five mount bolts
How do you remove a 1998 Nissan Sentra transmission?
To remove a 1998 Nissan Sentra Transmission, you first need to locate all of the bolts. From there, you will remove the bolts. Undo any wiring or tubing that goes into the transmission. From there, it can be taken out.
How do you change the rotors in 2002 Nissan Altima?
two large bolts behind the rotor wich also holds the caliper
How do you remove the starter unit from a 95 Nissan Altima after disconnecting two wires and two attachment bolts?
this site might help ------>
Is the Transmission locking or non-locking differential of a 93 Nissan Altima SE 4dr sedan 24L automatic?
Refer to the transmission code printed on the information sticker on the drivers door pillar (structure where upper hinge bolts to). RE4F04V = lockingRE4F04A = nonlocking Warning: The transmission could have been previously replaced with the other type.
How do you remove the center console of a 1999 Nissan Altima?
The center console is held in place with for retaining bolts. The retaining bolts are underneath the carpet. Pull back the carpet and remove the bolts. You will also need to remove the shifter knob.
How would you replace the driver side power mirror of a '99 Nissan Altima if the electrical connections are intact?
The mirror is held on by bolts on the inside of the door.
How many bolts are holding the alternator of a 97 Nissan Altima 4 cylinders and where are they located?
2 an adjustable one on top and a longer one at the bottom of it.
How would you remove the dashboard from a 1997 Nissan altima?
The 1997 Nissan dashboard is held in place with six retaining bolts and 12 retaining clips. Remove the retaining bolts and pry outward on each retaining clip. The dashboard will come off in two pieces.
