0
There is only one spindle per physical disk.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
What is SCSI HDD?
Hyper Drive Distibutor
How many different HDD?
1. IDE Hard Disk 2. SATA Hard Disk 3. SCSI Hard Disk 4. Ultra SCSI Hard Disk
What is you replace a customer's hdd with a single ended scsi system using approximately eight meters of cables in the scsi system after this installation the peripherals have stopped functioning wh?
the cable length is too long.
What is a Hitachi HDS721616PLA SCSI disk device my computer tells me that the program is still running and that I cannot safely remove the device?
It is your hard drive, most likely it is not SCSI, it is SATA, just Windows recognize it as SCSI. You really should not attempt to remove it if it is the main HDD from which you boot your Windows.
SCSI bus can support up to how many devices simultaneously?
SCSI, Fast SCSI, Ultra SCSI, Ultra2 SCSI: 8 devices Wide SCSI, Fast Wide SCSI, Ultra Wide SCSI, Wide Ultra2 SCSI, Ultra3 SCSI, Ultra160 and 160+ and Ultra320 : 16 devices Of course, the number of devices supported depends not only on protocol limitations, but cable length, number of cables used, etc.
What is a task that you have to perform when installing SCSI devices?
Assign each SCSI device a unique ID number
What is an accurate number of SCSI devices that can be connected on a SCSI bus including the host adapter?
8 devices:)
Can you connect both SCSI HDD and IDE HDD in the same PC?
oh sure,deffanetly connected both oh HDD in same pc, still configure function are different. first time formated the SCSI hard disk.then setup windows and another IDE formated over here and then SCSI's jumper put-up and put-in the IDE'S jumper and the restart the computer. Not only you can have a SCSi and IDE in the same computer but you can now use an IDE drive on a SCSI controller with proper adaptor http://www.addonics.com/products/io/ Most standard PC can have up to 4 IDE devices. You can use an Adaptec IDE RAID controller (like the 1210sa) and add 4 more in a single PC. Or you can use a SCSI adapter with IDE drives and SCSI to IDE converts to have up to 32 drives in a single computer (if you can fit them) Basically, all of the new low cost RAID boxes are made with SCSI to IDE converter using a SCSI controller. Now there is a difference in MTBF. The SCSI will last longer and work harder... as for speed the difference is not much anymore. For half the price and double the capacity, the IDE is still a deal (with the price of the SCSI to IDE adaptor) Ex 73GB SCSI $300 to $400 200GB IDE $120 As for installing it all depends on your system and OS. Depending if you need the SCSI to boot or just be a data drive. For ex when installing as a boot drive under win2000 you will need the driver on a floppy disk. At start up of the install press F6 so the driver will be loaded at the proper time in the installation.... Depending also if you are installing a RAID there will be a special bios setup (in the SCSI card) to set to mount the RAID. Hope this helps Yes
What is SCSI ID number for CD?
id 2
Which ID number is normally assigned to the SCSI controller?
The ID number which is traditionally assigned to the SCSI controller is ID 7. ID 7 is given the highest priority during bus arbitration.
Which version of scsi is known as fast scsi?
SCSI-2
Which two SCSI connectors might be used with narrow SCSI?
DB25 SCSI connector50 pin SCSI connector
