O2 sensors are located in the manifolds & front pipes
My 91 Bronco did the same thing before I found a crack in the passenger side exhaust manifold. Replaced with 50 state smog legle headers and a new O2 sensor and fixed the problem.
According to the ( 1996 ) Ford Bronco Owner Guide : The engine cooling system came from the factory with a 50 / 50 mix of distilled water and GREEN color antifreeze ( meeting Ford specification ESE-M97B44-A )
A 1996 Ford Bronco came from the factory with a 50 / 50 mix of distilled water and GREEN color antifreeze ( meeting Ford specification ESE-M97B44-A ) in the engine cooling system * THAT includes the radiator
put it in 4x4, and it does it for you. or install locking hubs for 50 bucks.
The 1994 Ford F1 50 crankshaft sensor is located on the back of the engine. You will need to remove the rear engine cover in order to access the crankshaft sensor.
The exhaust back pressure sensor on a 2006 6.0 diesel Ford F3 50 can be located near the exhaust manifold. The sensor is a probe that can be removed by loosening the nut.
The 1992 Ford F2 50 pickup truck 5.8 liter engine coolant temperature sensor can be found on the top of the engine. The coolant temperature sensor will be near the intake manifold.
For a 1996 Ford Bronco : I don't know what the capacity is for the radiator alone : For the entire engine cooling system : 5.0L V8 , anywhere from 13 to 15 U.S. quarts depending on how it is equipped * manual or automatic , air conditioning , super engine cooling 5.8L V8 , 16 to 17 quarts It came from the factory with a 50 / 50 mix of distilled water and GREEN color antifreeze ( meeting Ford specification ESE-M97B44-A )
The 1986 Ford F1 50 pickup truck fuel pump fuse will be the number six fuse. The number six fuse will be in the first column, fourth from the bottom.
The 1992 Ford F1 50 pickup truck 4.9 liter engine crankshaft sensor can be found on the back of the engine. You will to remove the rear engine cover in order to access the sensor.
.The 2003 Ford F2 50 pickup truck door sensor is located be wall the door latch. When the door closes it creates a ground. The completed ground turns the open door light off
50-100 USD