Should be around 25-30 psi. 15-20 at idle speed in drive.
The oil pressure switch on a 1998 Chevy Blazer is on the side of the engine block. It is located above the oil filter.
The oil pressure switch on a 1997 Chevy Blazer is located on the bottom of the engine, near the oil filter. It monitors the output and pressure of the oil pump.
it is under the distributor.
time for an oil change
it is behind the destribuater at the firewall
To drain the oil on a 1991 Chevy S10 Blazer, located the oil pan drain plug. Use a wrench to remove the plug and the oil will flow into the receptacle you have provided.
It is on the drivers side quarter panel right behind the headlight.
The oil pressure switch is directly behind the carburator. Between the distributor and the carb.
There is no "oil cam sensor". There is a oil pressure sensor and a cam sensor, but they are two different sensors.
Just above the oil filter housing on the lower passenger side of the truck.
The 4.3L engine holds 4.5 qts with filter change.
on a 4.3L, top of engine near the distributor; toward the driver's side.