Check the bulb, it could be blown.
The turn signal flasher is what makes the noise and lets the turn signal flash.
the clicking sound is the blinker. when you signal to turn with your blinker the light flashes and makes a clicking sound.
If you are asking for the location of the Turn Signal Flasher Relay, it is located in Junction Block 1A (under dash on drivers side). Block 1B has the fuses, Block 1A the relays. The flasher is the small relay at the end opposite the group of four (4) relays.
try replacing the blinker under the dash that little box that makes the blinker sound
Flasher is under the dash, drivers side, follow the clicking sound the signal makes when turned on. That sound comes from the flasher. If signal is staying on it could be you have a bulb or two out. Check your signal lights before replacing the flasher.
the flasher relay.
No flasher. Relay in the cluster circuitry emulates the sound of conventional flasher. The circuit is mux ( module controlled)
Bad bulb, corroded socket, or loose or disconnected wiring.
it is not the hazard system, but comes from the speedo cable which is routed behind the dashboard thus making it sound like the flasher unit.
turn your blinker of
switch is bad DON'T ALWAYS LISTEN TO MECHANICS, YOU CAN FIX IT YOURSELF. The contacts from your blinker switch are dirty. Here is a forum that tells you exactly how to clean it http://www.grandamgt.com/forum/showthread.php?t=50126&highlight=clicking+signal+light
when you flip your blinker on, a relay in the circuit is activated which turns the light on and off. also, the front blinker and rear blinker usually alternate in turning off and on, so when the back is on, the front will be off, and reverse.. that's why when a bulb is out, the clicking sound in the vehicle goes faster than when both are in working order.