PCV located on top of driver valve cover closer to firewall - easy to get to and replace.
where is pcv hose on a 1997 ford exploer Eddie Bauer
pcv valve location on 98 ford explorer
the hose that is connect to your engine.
At the top of the engine's left head cover, to your right when you open the hood. you will see air hose connected to it. Remove the hose and then pull the PCV.
The PCV valve for your 1996 Ford Explorer - 5.0 L - V8 engine is at the back of the intake manifold - according to my Haynes repair manual
WikiAnswers can not show diagrams or photos.
The PVC valve for a 2005 beetle is in a tee hose. The hose is on the front right under the intake manifold.
On the 1998 Ford Explorer Sport with 4.6L V8 the positive crankcase ventilation (PCV) will be located on the driver's side of the vehicle. On top of the front-left engine valve cover will be a grommet and hose assembly. In between the grommet and hose, and attached to the valve cover is the PCV valve.
The PCV valve is located on the right side of the valve cover. After removing the hose, there is a retainer clip then the valve can be removed with pliers.
The 2001 VW PCV valve can be found on the clean air hose. The clean air hose will go from the air filter housing to the top of the engine.
The PCV valve should be installed in the top of the valve cover on the driver's side of the engine , towards the firewall.
The PVC valve is located on the back side of the drivers side valve cover . It has a black hose approximately 5" in length and 1" in diameter attached to it. The other end of the hose attaches to the intake manifold. Both ends of the hose are attached by pushing over the fittings, no clamps.