What kind of appliances? All electric ranges and dryers are 240 volt. You can get them anywhere appliances are sold.
yes 240volts is 240 volts
120/240 volts is the working voltage in North America.
You don't.
It is not just the outlet, but the wiring and breakers that need to be compatible with your 240 Volt appliance. Get an electrician to look at your requirement.
No, use only the voltage for the appliance that your utility system is supplying to your residence. If your system is 208 volts use 208 volt appliances. Likewise if the utility system is 240 volts use only 240 volt appliances. 208 appliances on 240 will overheat the appliances and 240 appliances on 208 will not produce the wattages that the manufacturer recommends for cooking and drying.
The pin configuration of the 240 volt receptacle is different from a 120 volt pin configuration. This is a safety factor to prevent the wrong voltage being applied to the wrong devices.
Yes you can, it was manufactured before the new European standards were brought out. I have no trouble with my 220 volt appliances.
If the appliance is 220 volt 60 Htz, yes it will work perfectly in the U.S. plugged into a 240 volt outlet.
Answer for USA, Canada and countries running a 60 Hz supply service.If you read the heating pad's manufacturers label and it definitely states that the pad is rated for 240 volts then it will be alright. The key give away will be the configuration of the plug, it will have tandem blades not like the parallel blades of everyday appliances. This will have to be inserted into a 240 volt configured receptacle as parallel blade devices will not go into the tandem blade receptacle.
Different system, US uses 110 volt. I think India uses 230 or 240 volt.
In North America the connection type is 120/240 volt single phase. This allows the use of 120 volts for smaller appliances and equipment along with 240 volts for larger appliances and equipment.
230 v appliances are made to work over a range of voltages and this includes 240 v. Usually the supply voltage can vary + or - 6% and the equipment must be designed for that. In the UK the nominal voltage is 230 v with a tolerance of -6% +10% because many or most of the outlets work at 240 v in practice.