It is not possible to remove the power steering pulley on a 1997 Buick Le Sabre without removing the power steering pump.
In the power steering fluid tank
how to remove power steering pump
I'm am looking for the same thing. I'm guessing the whole pulley moves somehow in the bracket that holds it. but I don't know.
the most likely cause of that would be the power steering pump failing.
You can bypass the power steering pump pulley in your 1993 Buick regal 3.8 liter engine. Measure the distance around the other pulleys, without the power steering pump pulley. Take the measurement to your local auto-parts stores and ask for a belt of that measurement.
You can rent a pulley puller from Autozone for free. They take a $40.00 deposit and when you are done with the tool, take it back, you get your $40.00 back. Call the store to make sure they one there, sometimes they are already out on loan.
remove the power steering pump
bottom left front of motor
No, but impossible to check anything else if it is leaking. And if the rack and pinon is leaking, then it will have to be changed anyway.
Should be directly behind altinator and below upper rad hose.
I believe that any kind of power steering fluid will work. You can actually use any type of hydraulic fluid (i.e. brake, power steering, or transmission). It is usually best to use only power steering fluid if you can get it.
you have to remove the motor mount and power steering pump
The Buick Riviera with supercharger should put out 240hp
In the Reatta it is located under the dash next to the steering collum. Silver box has "central power supply" printed on it.
Have you checked to make sure the belt is still on the PS pump pulley?
power steering reservoir is located on the back side of the engine. look for the power steering pulley to the left of that. look over the alternator with flash light down to your left the reservoir has fluid written on the top
It originally used Type A but the modern equivalent is Dexron III A/T fluid.
That requires the use of a power steering pulley PULLER. ( A special tool ) The pulley is pressed on.
Power steering usually powered by that pulley.
This requires a power steering pulley puller. This puller is designed to remove and install a power steering pulley without damage to the pulley and or pump. Attempting to do this without the puller will result in damaging the pulley or the pump or both.
360 bhp is the power of the Buick riviera coupe 1975 engine and its maximum speed is 125 mph.
Begin by removing the power steering pump belt from your 1991 Cadillac power steering pump pulley. Remove the power steering pump pulley retaining bolt. The retaining bolt will be in the center of the pulley.
1st remove belt you will need a power steering pulley puller can rent from your local parts store follow instructions supplied with puller finally reinstall belt
where is the power steering hose on a 1994 buick century